210-065 | Accurate 210-065 Dumps 2019

are updated and are verified by experts. Once you have completely prepared with our you will be ready for the real 210-065 exam without a problem. We have . PASSED First attempt! Here What I Did.

Online Cisco 210-065 free dumps demo Below:

NEW QUESTION 1
Which CLI command must be used to configure the network settings on a Cisco TelePresence 4500 MCU?

  • A. Static A <IP address> <netmask> [<default gateway address>]
  • B. Network ip<ip address><netmask><default gateway><DNS server address>
  • C. Xconfig network address<ip address><netmask><default gateway>
  • D. Xconfig network address<ip address><netmask><default gateway><DNS server address>

Answer: A

NEW QUESTION 2
Refer to the exhibit.
210-065 dumps exhibit
When the Cisco Jabber Video for TelePresence fails to register with the server, which two fields should be configured at a minimum, assuming SRV records are not configured? (Choose two.)

  • A. the internal or external DNS server name for the Cisco TelePresence Video Communications Server
  • B. the internal DNS server name for the Cisco TelePresence Management Suite
  • C. the SIP domain
  • D. the IP address of the Cisco TelePresence Management Suite for the internal server
  • E. the IP address of the Cisco Unified Communications Manager for the internal server

Answer: AC

NEW QUESTION 3
Which type of packet-oriented network has the characteristic of being drop-tolerant and delay insensitive?

  • A. data
  • B. voice
  • C. video
  • D. converged
  • E. All packet-oriented networks share these characteristics.

Answer: A

NEW QUESTION 4
Threat monitoring in physical access security can be based upon which three of these? (Choose three.)

  • A. doors
  • B. badges
  • C. age
  • D. weather
  • E. height
  • F. fingerprints

Answer: ABF

NEW QUESTION 5
Which protocol does the Cisco TelePresence Content Server use for call signaling?

  • A. MGCP
  • B. Cisco Proprietary
  • C. SCCP
  • D. H.323

Answer: D

NEW QUESTION 6
A network engineer is setting up a Cisco TelePresence Content Server. The customer requires live streaming, but does not have a streaming server. Which media should be configured to stream locally from the TelePresence Content Server?

  • A. QuickTime
  • B. MPEG-4
  • C. Flash
  • D. Windows Media
  • E. Darwin

Answer: D

NEW QUESTION 7
Which two methods are used to navigate the menu options of an auto attendant on an MCU? (Choose two.)

  • A. KPML
  • B. DTMF
  • C. PiP
  • D. PoP
  • E. FECC
  • F. SCCP

Answer: BE

NEW QUESTION 8
Which two methods can be used to retrieve the status of a Cisco TelePresence codec endpoint? (Choose two.)

  • A. From the codec web GUI, choose Troubleshooting > System Status.
  • B. From the codec web GUI, choose Diagnostics > System Status.
  • C. From the codec web GUI, choose Configuration > System Status.
  • D. Run the xstatus command from the CLI.
  • E. Run the xcommand status command from the CLI.

Answer: CD

NEW QUESTION 9
Which conference types can occur at anytime without the need for the conference to be scheduled, and can be created as permanent conferences?

  • A. ad hoc conferences
  • B. auto-dialed participants
  • C. Multiway conferences
  • D. scheduled conferences
  • E. rendezvous conferences

Answer: E

NEW QUESTION 10
Which two devices are Cisco Digital Media Player Models? (Choose two.)

  • A. Cisco MXE
  • B. Edge 300
  • C. Edge 340
  • D. Cisco Cast

Answer: BC

NEW QUESTION 11
Which function does BFCP provide?

  • A. BFCP is a secondary video channel that is used for content such as slide presentations and desktop sharing.
  • B. BFCP is used to determine who is allowed to send media to the content channel.
  • C. BFCP provides the ability to pan, tilt, and zoom the far end's camera.
  • D. BFCP negotiates who can send DTMF tones and when the tones are sent.

Answer: B

NEW QUESTION 12
A customer is unable to receive calls on the EX90 endpoint, but can make outbound calls. The endpoint uses CUCM for call control and registration. If the engineer only has remote access to the EX90 and CUCM, what are the next two troubleshooting steps? (Choose two.)

  • A. Check CUCM to see if the extension is in a reachable partition.
  • B. Check CUCM to see if the endpoint has the correct Device Calling Search Space
  • C. Check CUCM to see if the endpoint is registered
  • D. Check the EX90 System Status
  • E. Check EX90 DND Status via WebAdmin

Answer: CD

NEW QUESTION 13
Which CTS software-based endpoint is an ideal solution for an executive office?

  • A. DX80
  • B. EX90
  • C. CTS 1100
  • D. CTS 500

Answer: A

NEW QUESTION 14
An engineer sees a video camera icon on the Cisco IP phone screen status line. Which meaning of this icon is true?

  • A. The Cisco VT camera is connected to the PC, and the PC is connected to the Cisco IP phone.
  • B. The Cisco IP phone has web access.
  • C. The Cisco IP phone is receiving a video call.
  • D. The Cisco IP phone is configured with video capabilities.

Answer: D

NEW QUESTION 15
Which light is recommended by cisco?

  • A. direct
  • B. indirect
  • C. point
  • D. reflector

Answer: C

NEW QUESTION 16
Which two of these are required in order to complete the password recovery of a Cisco TelePresence System endpoint? (Choose two.)

  • A. must have FTP enabled on the endpoint
  • B. must have SSH enabled on the endpoint
  • C. must have the security question answer for the endpoint
  • D. must be in the same room as the main display
  • E. must have SFTP enabled on the endpoint
  • F. must call Cisco TAC for the security code

Answer: BD

P.S. Easily pass 210-065 Exam with 377 Q&As Surepassexam Dumps & pdf Version, Welcome to Download the Newest Surepassexam 210-065 Dumps: https://www.surepassexam.com/210-065-exam-dumps.html (377 New Questions)