2V0-620 | VMware 2V0-620 Braindumps 2021

Our pass rate is high to 98.9% and the similarity percentage between our 2v0 620 dump and real exam is 90% based on our seven-year educating experience. Do you want achievements in the VMware 2V0-620 exam in just one try? I am currently studying for the 2v0 620 dump. Latest 2v0 620 dump pdf, Try VMware 2V0-620 Brain Dumps First.

Online VMware 2V0-620 free dumps demo Below:

NEW QUESTION 1
Which three traffic types are available services options when configuring a vmkernel port? (Choose three.)

  • A. Provisioning Traffic
  • B. Virtual Volumes Traffic
  • C. vSphere Replication NFC Traffic
  • D. Virtual SAN Traffic
  • E. FCoE Traffic

Answer: ACD

NEW QUESTION 2
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 6.x and 6.x Hosts.
Which Distributed Switch version should be created to support this configuration?

  • A. Distributed Switch: 6.0.0
  • B. Distributed Switch: 5.0.0
  • C. Distributed Switch: 5.1.0
  • D. Distributed Switch: 5.5.0

Answer: B

NEW QUESTION 3
An administrator is creating a new Virtual SAN cluster on a Layer 2 network. There is an existing Virtual SAN cluster on the same Layer 2 network.
Which two actions would allow the new Virtual SAN cluster to coexist with the older cluster? (Choose two.)

  • A. Change the default Multicast Address on the new Virtual SAN cluster.
  • B. Change the default Unicast Address on the new Virtual SAN Cluster.
  • C. Create a separate VLAN for each cluster.
  • D. Create an ARP Alias for the Virtual SAN VMkernel Network Adapter.

Answer: AC

NEW QUESTION 4
You are creating a virtual machine in the Web Client using the New Virtual Machine wizard.
Which two steps are required? (Choose two.)

  • A. Select a valid name.
  • B. Select a cluster for the compute resource.
  • C. Select a network adapter.
  • D. Select the virtual machine compatibility.

Answer: AD

NEW QUESTION 5
An administrator is upgrading an ESXi 3.5 host to ESXi 6.x with an intermediate upgrade to
4.0 using Update Manager. The host has a single Intel Xeon processor, 4GB of RAM, and a VMFS datastore on a private, SAN-attached LUN. What might cause the upgrade to be unsuccessful?

  • A. The ESXi host has 4GB RAM.
  • B. The ESXi host has one processor.
  • C. ESXi 3.5 is not supported for upgrade.
  • D. Update Manager cannot upgrade a previously upgraded host.

Answer: C

Explanation: Reference:
http://pubs.vmware.com/vsphere-50/index.jsp?topic=%2Fcom.vmware.vsphere.upgrade.doc_50%2FGUID-AA106086-E10D- 456E-B0B9-340D3D1462C3.html

NEW QUESTION 6
An administrator is attempting to power on a virtual machine, but the task is hanging at 95%.
What three scenarios best explain why this problem is happening? (Choose three.)

  • A. A virtual machine question is currently being posed to the administrator.
  • B. Another task for the virtual machine or other component is already in progress.
  • C. The VMware High Availability cluster has insufficient resources to guarantee failover.
  • D. The host has lost access to the storage device containing the virtual machine files.
  • E. The host is under resource contention and unable to power on the virtual machine.

Answer: ABC

NEW QUESTION 7
Which two actions are required when enabling vFlash Read Cache for a virtual machine's virtual disk? (Choose two.)

  • A. A value in the Virtual Flash Read Cache text box must be entered.
  • B. A Flash Resource Pool for Cache size reservation must be entered.
  • C. The Device backing and the block size must be configured.
  • D. The Enable virtual flash host swap cache check box must be selected.

Answer: AD

NEW QUESTION 8
An administrator plans to deploy ESXi 6.x, but does not want to use CD or DVD media.
What are two alternate ways to provide the ESXi 6.x installation script to the host? (Choose two.)

  • A. PXE
  • B. FTP
  • C. HTTP
  • D. IPMI

Answer: BC

Explanation: ESXi 6.x allows you to use FTP and HTTP to provide installations script to the host if you don’t want to use DVD or other media.

NEW QUESTION 9
An administrator would like to have vCenter take action any time a virtual machine is using over 90% of its available resources for five minutes or longer.
Which three actions can be taken by vCenter Server in response to the trigger without running a script? (Choose three.)

  • A. Power on a VM
  • B. Reboot Guest on VM
  • C. Increase Virtual Machine Memory
  • D. Migrate a VM
  • E. Increase Virtual Machine CPU Shares

Answer: ABD

Explanation: Power on a VM, reboot guest and Migrate a VM will be the actions taken by vCenter Server in response to a trigger without needing a script.

NEW QUESTION 10
An administrator is attempting to power on a virtual machine, but is unable to do so.
Which two reasons are probable causes of the failure? (Choose two.)

  • A. Storage access to the virtual machine swap file has been lost.
  • B. One of the virtual machine VMDK files is locked.
  • C. Virtual machine is running CentOS 7.0 64-bit.
  • D. Virtual machine has Hyper-Threading enabled.

Answer: AB

NEW QUESTION 11
When attempting to access a virtual machine, an administrator is unable to login using the vSphere credentials.
What two options are probable causes of the authentication failure? (Choose two.)

  • A. The vSphere credentials have not been granted permissions.
  • B. The vSphere credentials are granted read-only permissions.
  • C. The vSphere credentials are granted no-access permissions.
  • D. The vSphere credentials are not a member of the local administrator group.

Answer: AB

NEW QUESTION 12
An administrator is performing a scripted installation of ESXi 6.x.
In which three locations does the script need to be? (Choose three.)

  • A. PXE Server
  • B. HTTPS
  • C. FTP
  • D. NFS
  • E. VVOLs Datastore

Answer: BCD

NEW QUESTION 13
An administrator needs to monitor traffic on vSwitches in a vSphere 6.x environment.
Which option, if configured, would accomplish this task?

  • A. Forged Transmits
  • B. MAC Address Changes
  • C. Promiscuous Mode
  • D. Notify Switches

Answer: C

NEW QUESTION 14
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions:
✑ High virtual CPU
✑ High active memory consumption.
The alarm is only triggering when both of the conditions are met.
What can be done to correct the alarm behavior?

  • A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
  • B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
  • C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
  • D. Delete the existing alarm and create a new event based alarm.

Answer: A

NEW QUESTION 15
Which functions can be performed with the Plug-in Manager? (Choose two.)

  • A. Enable an installed plug-in
  • B. Remove permissions for a plug-in
  • C. View the status of installed plug-ins
  • D. Uninstall a plug-in

Answer: AC

Explanation: Reference: http://www.kumatech.ca/download/docs/110_6081-EN_R3_HIT_VE_Installation_Guide_web.pdf (page 13)

NEW QUESTION 16
Click the Exhibit button.
2V0-620 dumps exhibit
An administrator has implemented a new vSphere 5 environment and is deploying their first Windows 2008 R2 template. When running the Deploy Template wizard, the error shown in the exhibit appears.
What can be done to correct the problem?

  • A. Select the correct guest OS setting for the virtual machine.
  • B. Windows 2003 x64 cannot be customized.
  • C. Download and install the Microsoft Sysprep tool into the virtual machine to be customized.
  • D. Download the Microsoft Sysprep tool to the appropriate vCenter Server directory.

Answer: D

Explanation: http://communities.vmware.com/thread/45830
See the table at: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1005593

NEW QUESTION 17
Refer to the Exhibit.
2V0-620 dumps exhibit
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit.
Which portgroup would be utilized by default when creating a new virtual machine?

  • A. Access Network
  • B. DMZ Network
  • C. VM Network
  • D. Virtual Machine Network

Answer: A

NEW QUESTION 18
An administrator attempts to create a Thick Provisioned Virtual Disk (VMDK) on an NFS datastore; but it fails.
Which two reasons would explain the failure? (Choose two.)

  • A. Datastore is on an NFS 3 storage server that does not support Hardware Acceleration
  • B. Datastore is on an NFS 4.1 storage server
  • C. Only VMFS datastores support "Thick Provisioned" VMDK
  • D. The NFS datastore was not created on a "Thick Provisioned" device

Answer: AB

NEW QUESTION 19
A vApp template recently added to a Content Library is not displayed.
Which two actions could correct this problem? (Choose two.)

  • A. Manually synchronize the library
  • B. Select the Download all library content immediately option
  • C. Select the Sync subscribed library option
  • D. Manually download the vApp template

Answer: AB

P.S. Easily pass 2V0-620 Exam with 212 Q&As 2passeasy Dumps & pdf Version, Welcome to Download the Newest 2passeasy 2V0-620 Dumps: https://www.2passeasy.com/dumps/2V0-620/ (212 New Questions)