3V0-21.18 | Most Recent Advanced Deploy VSphere 6.5 Exam 2018 3V0-21.18 Samples

Proper study guides for Down to date VMware Advanced Deploy vSphere 6.5 Exam 2018 certified begins with VMware 3V0-21.18 preparation products which designed to deliver the Top Quality 3V0-21.18 questions by making you pass the 3V0-21.18 test at your first time. Try the free 3V0-21.18 demo right now.

Online VMware 3V0-21.18 free dumps demo Below:

NEW QUESTION 1
Due to budget constraints, the development team must place its virtual machines on the same ESXi hosts as the production virtual machines. In order to prevent resource contention caused by the development workload, you must limit their resources.
On Cluster PROD-A create a resource pool under this cluster for future development VMs. Create a 4 GHz CPU limit and a 256 MB memory limit
• Cluster Name: PROD-A
• Resource Pool Name: DevRP
• CPU Limit: 4 GHz
• Memory Limit: 256 MB Send us your suggestions.

  • A. Mastered
  • B. Not Mastered

Answer: A

NEW QUESTION 2
A vSphere administrator has deployed a new server. The VM will have a workload which is prodApp1 to the following specifications:
• The VM should never have any memory contention while powered on. even if the host that it resides
• Configure the virtual machine for high latency sensitivity.
Send us your suggestions.

  • A. Mastered
  • B. Not Mastered

Answer: A

NEW QUESTION 3
The company's IT strategy is to adopt innovative and emerging technologies such as software-defined storage solution. The IT team has decided to run their business-critical workloads on an all-flash Virtual SAN (vSAN) as it provides excellent performance.
The IT team has purchased servers that are compatible with vSAN. However, all the solid-state drives (SSD) in the servers are shown incorrectly as hard-disk drives (HDD) instead.
In addition, some of the solid-state drives (SSD) will be used for other purposes instead of vSAN and should not be part of the vSAN cluster. These are the requirements for the vSAN cluster:
•In each server, use the 3CB SSD as the cache tier and the 11GB SSD as the capacity tier
• As a result the vSAN cluster will use a total of six SSDs (three SSDs for caching and three SSDs for capacity
• Ensure all the disks that will be used for vSAN are shown correctly as SSDs
• Provide storage savings by using deduplication and compression.
Next, the IT team wants to improve the performance and availability of the business-critical workloads on the vSAN-datastore.
Ensure the following configurations will be applied on existing and new workloads located on vSAN-datastore:
3V0-21.18 dumps exhibit Number of disk stripes per object: 2
3V0-21.18 dumps exhibit Primary level of failures to tolerate: 2
3V0-21.18 dumps exhibit Failure tolerance method: RAID-1 (Mirroring)
3V0-21.18 dumps exhibit Force provisioning; Yes
The new configurations should be applied by default.
You may create new storage policy but do not edit the default vSAN storage policy as it may be used by other vSAN clusters in the future. Name the policy "New vSAN Default'.
Nate-. All tasks should be executed in PROD-A host cluster.
Send us your suggestions.

  • A. Mastered
  • B. Not Mastered

Answer: A

NEW QUESTION 4
You have been asked to create a new datastore for the Production cluster; however, the ESXi host esxi02a is not able to add the datastore. Your storage team has determined that there is nothing incorrect with the storage
presentation.
Troubleshoot why host esxi02a is not able to create the datastore. Add the datastore to the host once the proper configuration has been applied, and then reboot the host!
Use the following information to complete this task;
• ESXi host: esxi02a
• Datastore Name: new_datastore
• Datastore target: iSCSI Target
• Datastore LUN: 4
• Reboot the host
Send us your suggestions.

  • A. Mastered
  • B. Not Mastered

Answer: A

NEW QUESTION 5
Your security team is getting ready for an audit and wants to check the status of all ESXI hosts' outstanding security patches. Create a new fixed Update Manager baseline for all security ESXi host patches and name it ''Security patches. ''Use the patches available in the patch repository. Use VCSA01a in this task.
3V0-21.18 dumps exhibit Baseline Name: Security Patches
3V0-21.18 dumps exhibit Baseline Type: Host Patch
3V0-21.18 dumps exhibit Category: Security
Send us your suggestions.

  • A. Mastered
  • B. Not Mastered

Answer: A

NEW QUESTION 6
The Virtual Infrastructure team wants to share a VM Template from vcsa0la to vcsa0lb via content libraries. Ensure that the content in the libraries is synchronized only when needed.
• Name of Published Content Library in vcsa0la: CL01
• Name of Subscribed Content Library in vcsa0lb: CL02
• For both content libraries, use the local datastore: SAN01
• VM Template to be shared: Core-Template
After the Core-Template has been synchronized from CL01 to CL02. deploy a virtual machine from VM-Template on vcsa0lb
• Name of virtual machine: CL-VM
• Host for virtual machine: »sxi03b
Send us your suggestions.

  • A. Mastered
  • B. Not Mastered

Answer: A

NEW QUESTION 7
The current vSphere environment will be adding new ESXi hosts that will be used to create a QA compute cluster. This cluster should have HA properties specific to the workloads that will be running in it.
In preparation of adding the new hosts, create the new cluster. QA-Cluster in. Datacenter-PROD on vcsa0la.vclass.local with the following HA requirements:
• The cluster should not contain any ESXi hosts or VMs
• Hosts should be monitored.
• VMs should be restarted in the event of a host failure.
• VMs should be restarted if guest heartbeats are not detected.
• In the case of a host becoming isolated, shutdown and restart VMs.
• If there is an All Paths Down event, any affected VMs must be moved to another host.
• Reserve 10% of memory and CPU for failover capacity.
Part 2
You have been given a requirement for a virtual machine to have no downtime when an ESXi host failure occurs. Configure Fault Tolerance on VM1-FT in the PROD-B cluster. Use any compatible secondary host and datastore. Configure the following advanced cluster settings. Use SAN01 as the storage during configuration.
3V0-21.18 dumps exhibit das.isolationaddress0 172.20.10.11
3V0-21.18 dumps exhibit dass.igoreRedundantNetWarining true
Note: ignore any related host, customer, or bandwidth warnings as long as fault tolerance is configured and VM1-FT is running.
Send us your suggestions.

  • A. Mastered
  • B. Not Mastered

Answer: A

NEW QUESTION 8
A user has approached you about a virtual machine with the name infra-1 that is performing poorly on the vCenter Server vcsa0la. In order to analyze the data offline, your team requires the esxtop data from the problem host with the following requirements:
• The esxtop data must be in CSV format
• The data must contain 20 iterations with a delay
Once captured, copy the results CSV file from the destination datastore on the host to the Desktop of the ControlCenter VM with the filename "esxiOlb-capture.csv'.
Note: WindSCP is installed on the Controller.
Send us your suggestions.

  • A. Mastered
  • B. Not Mastered

Answer: A

NEW QUESTION 9
......

Recommend!! Get the Full 3V0-21.18 dumps in VCE and PDF From Surepassexam, Welcome to Download: https://www.surepassexam.com/3V0-21.18-exam-dumps.html (New 17 Q&As Version)