70-740 | Pinpoint 70-740 Training Materials 2020

Download of 70-740 torrent materials and samples for Microsoft certification for IT examinee, Real Success Guaranteed with Updated 70-740 pdf dumps vce Materials. 100% PASS Installation, Storage, and Compute with Windows Server 2016 exam Today!

Free 70-740 Demo Online For Microsoft Certifitcation:

NEW QUESTION 1
Note: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain. The domain contains a new file server named Server1 that runs a Server Core installation of Windows Server 2016.
Server l has an ReFS-formatted volume D: and an NTFS-formatted volume E:. the- volumes do not contain any data.
You Install the Data Deduplication role service on Server l.
You need to implement Data Deduplicalion for volumes on Di and E:.
Solution; From Windows PowerShell. you run Format-Volume D: -FlleSystem NTFS and Enable- DeDupVolume-Volume D:,E:.
Does this meet the goal?

  • A. Yes
  • B. No

Answer: A

NEW QUESTION 2
You create a Nano server image named Nano1.vhdx by using the New-NanoServerImage cmdlet. You attach Nano1.vhdx to a Generation 1 virtual machine named Nano1.
When you start Nano1, you get the following error message: “Boot failure. Reboot and select proper Boot device or Insert Boot Media in selected Boot device”
You need to successfully start Nano server. What should you do?

  • A. Attach Nano1.vhdx to a SCSIcontroller.
  • B. Recreate Nano1 as a Generation 2 virtual machine.
  • C. Increase the memory of Nano1 to 512 Mb.
  • D. Modify the BIOS settings of Nano1.

Answer: B

Explanation:
A Generation 1 VM cannot boot from a vhdx disk; only a Generation 2 VM can boot from an vhdx disk.

NEW QUESTION 3
Your network contains an Active Directory domain. The domain contains a new file server named
Server1 that runs a Server Core installation of Windows Server 2016.
Server1 has an ReFS-formatted volume D: and NTFS-formatted volume E: The volumes do not contain any data.
You install the Data Deduplication role service on Server1.
You need to implement Data Deduplication for volumes on D: and E:.
Solution: From Windows PowerShell, you run Format-Volume D: -FileSystem EXFat and Enable- DeDupVolume -Volume D:,E:.
Does this meet the goal?

  • A. Yes
  • B. No

Answer: A

NEW QUESTION 4
Nano Server is foundational to the modern datacenter and is useful in two core scenarios: As a private cloud infrastructure it's particularly useful for clustered Hyper-V, clustered storage and core networking services scenarios; or as an application platform it's highly optimized for modern distributed and cloud-based apps which leverage containers and micro service architectures.
Is the following statement TRUE or FALSE?
A local interface with UI support is available for offline management of Nano Servers?

  • A. TRUE
  • B. FALSE

Answer: B

Explanation:
A local interface with UI support is NOT available for Nano servers. You must administer them remotely using PowerShell.

NEW QUESTION 5
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might
have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. Server1 and VM1 run Windows Server 2016.
The settings for VM1 are configured as shown in the exhibit. (Click the Exhibit button.)
70-740 dumps exhibit
You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1. Solution: You connect VM1 to an internal virtual switch.
Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

NEW QUESTION 6
DRAG DROP
Your network contains an Active Directory domain named contoso com The domain contains two servers named Server1 and Server2 that run Windows Server 2016.
Server1 has IP Address Management (IPAM) installed Server2 has Microsoft System Center 2016 Virtual Machine Manager (VMM) installed.
You need to integrate IPAM and VMM
Which types of objects should you create on each server? To answer, drag the appropriate object types to the correct servers Each object type may be used once, more than once, or not at all You may need to drag the split bar between panes or scroll to view content
70-740 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
70-740 dumps exhibit

NEW QUESTION 7
You have a server named Server1 that runs Windows Server 2016 and has the File and Storage Services server role installed. Server1 has an ReFS-formatted volume named Volume1 that is 512 GB. Volume1 is mounted as C:\App1\temp. You need to ensure that you can enable deduplication of Volume1. What should you do?

  • A. Initialize the physical disk that contains Volume1.
  • B. Install a Windows feature.
  • C. Format Volume1.
  • D. Unmount Volume1.

Answer: B

NEW QUESTION 8
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server 1 that runs Windows Server 2016.
You plan to use Windows Server Backup to back up all of the data on Server l. You create a new volume on Server 1.
You need to ensure that the new volume can be used as a backup target. The backup target must support incremental backups.
Solution: You assign a drive letter to the volume, and you format the volume by using ex FAT. Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

NEW QUESTION 9
You have a Windows Server 2016 failover cluster 1 that contains four nodes named Server1, Server2, Server3, Server4, Cluster1 hosts 40 virtual machines that are distributed evenly across the nodes. Server1 and Server2 are located in a data center in Madrid. Server3 and Server4 are located in a data center in Barcelona.
You need to ensure that when you pause a node in the other data center.
Which two actions should you perform? Each correct answer present part of the solution.

  • A. Run the New-Cluster Fault Domain cmdlet.
  • B. Run the Add-Cluster Group cmdlet.
  • C. Configure a file share witness for each data center.
  • D. Run the Set-Cluster Fault Domain cmdlet.
  • E. Create an Active Directory site for each data center.
  • F. Change the quorum configuration of the cluster to Node Majority.

Answer: BD

NEW QUESTION 10
Note: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are a server administrator at a company named Contoso, Ltd.
Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table.
70-740 dumps exhibit
All of the virtual switches are of the external type.
You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network.
Solution: You implement live migration by using Host2 and Host4. Does this meet the goal?

  • A. Yes
  • B. No

Answer: A

NEW QUESTION 11
HOTSPOT
You deploy a new Hyper-V host named Server1 that runs Windows Server 2016. You implement receive side scaling (RSS) on Server1.
The chipset on Server1 does not support NetDMA.
All of the equipment on your network supports 10-Gbps connectivity. On Server1, you deploy a virtual machine named VM1.
You configure VM1 to aggregate all of the Windows and non-Windows log files for all of the servers on the network.
VM1 has four virtual processors.
You discover that VM1 drops packets.
Which two options should you run? To answer, select the appropriate options in the answer area.
70-740 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
70-740 dumps exhibit

NEW QUESTION 12
After you answer a question in this section, you will NOT be able to return to it. As a result, these
questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2016.
You plan to use Windows Server Backup to back up all of the data on Server1. You create a new volume on Server1.
You need to ensure that the new volume can be used as a backup target. The backup target must support incremental backups.
Solution: You mount the volume to C:\Backup, and you format the volume by using exFAT. Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

NEW QUESTION 13
Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have two servers named Server1 and Server2 that run Windows Server 2016 Server1 and Server2 have the Hyper-V server role installed
An iSCSI SAN connects to the network
You create a LUN on the SAN and configure both servers to connect to the iSCSI target
You create a failover cluster and add Server1 and Server2 to the cluster. You connect both servers to the iSCSI target and format the shared storage
You need to add the shared storage to the cluster The solution must ensure that virtual machines running on both nodes can access the shared storage
simultaneously.
Which tool should you use?

  • A. the clussvc.exe command
  • B. the cluster.exe command
  • C. the Computer Management console
  • D. the configurehyperv.exe command
  • E. the Disk Management console
  • F. the Failover Cluster Manager console
  • G. the Hyper-V Manager console
  • H. the Server Manager Desktop app

Answer: F

NEW QUESTION 14
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 and a member server named Server2.
Server1 has the DNS Server role installed Server2 has IP Address Management IPAM installed The IPAM server retrieves zones from Server1 as shown in the following table
70-740 dumps exhibit
70-740 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
70-740 dumps exhibit

NEW QUESTION 15
Note: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.
You have a server named Server1 that runs Windows Server 2016. Server1 hosts a line-of-business application named App1. App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory.
You need to log an event in the Application event log whenever App1 consume more than 4 GB of memory.
Solution: You create a performance counter data collector. Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

NEW QUESTION 16
DRAG DROP
You have a file server named Server1 that runs Windows Server 2016.
You need to create a report that lists all of the share permissions assigned to the security principals on Server1.
How should you complete the command? To answer, drag the appropriate cmdlets to the correct targets. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
70-740 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
70-740 dumps exhibit

NEW QUESTION 17
HOTSPOT
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has a virtual disk file named Disk1.vhdx that contains an installation of Windows Server 2016.
You create a virtual disk file named Disk2.vhdx that is configured as shown in the following exhibit.
70-740 dumps exhibit
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
70-740 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
70-740 dumps exhibit

NEW QUESTION 18
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. Server1 and VM1 run Windows Server 2016.
The settings for VM1 are configured as shown in the exhibit. (Click the Exhibit button.)
70-740 dumps exhibit
You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1. Solution: You enable the Guest services integration service for VM1.
Does this meet the goal?

  • A. Yes
  • B. No

Answer: A

Explanation:
References: https://technet.microsoft.com/en-us/library/dn798297(v=ws.11).aspx

NEW QUESTION 19
You have a failover cluster named Cluster!
A virtual machine named VM1 is a highly available virtual machine that runs on Cluster1 A custom application named App1 runs on VM1.
You need to configure monitoring of VM1. If App1 adds an error entry to the Application event log, VM1 should be automatically rebooted and moved to another cluster node
Which tool should you use?

  • A. Hyper-V Manager
  • B. Failover Cluster Manager
  • C. Server Manager
  • D. Resource Monitor

Answer: B

NEW QUESTION 20
A company named Contoso, Ltd has five Hyper-V hosts that are configured as shown In the following table.
70-740 dumps exhibit
What are two valid live migration scenarios for virtual machines in your environment? Each correct answer presents a complete solution.

  • A. from Server4 to Server5
  • B. from Server1 to Server5
  • C. from Server3 to Server4
  • D. from Server2 to Server3

Answer: BD

NEW QUESTION 21
You have an Active Directory domain named Contoso com The domain contains servers named
Server1 and Server2 that run Windows Server 2016. You install the Remote Access server role on Server1. You install the Network Policy and Access Services server role on Server2. You need to configure Server1 to use Server2 as a RADIUS server.
What should you do?

  • A. From Routing and Remote Access, configure the authentication provider.
  • B. From the Connection Manager Administration Kit, create a Connection Manager profile
  • C. From Server Manager, create an Access Policy.
  • D. From Active Directory Users and Computers, modify the Delegation settings of the Server1 computer account.

Answer: A

NEW QUESTION 22
You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 are connected to the same network.
On Server1 and Server2, you create an external network switch named Switch1. You have the virtual machines shown in the following table.
70-740 dumps exhibit
All three virtual machines are connected to Switch1.
You need to prevent applications in VM3 from being able to capture network traffic from VM1 or VM2. The solution must ensure that VM1 retains network connectivity.
What should you do?

  • A. On Server2, configure the VLAN ID setting of Switch1.
  • B. On Server2, create an external switch and connect VM3 to the switch.
  • C. Modify the subnet mask of VM1 and VM2.
  • D. Configure network virtualization for VM1 and VM2.

Answer: D

NEW QUESTION 23
In this section, you'll see one or more sets of questions with the same scenario and problem Each
question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration
70-740 dumps exhibit
You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1
must resolve queries from all other DNS clients
Solution From Windows PowerShell on Setver1, you run the Add-DnsServerTrustAnchor cmdtel Does this meet the goal?

  • A. Yes
  • B. No

Answer: A

NEW QUESTION 24
You need to implement network virtualization.
On which object should you configure the virtual subnet ID?

  • A. Virtual switch
  • B. Hyper-V server
  • C. VM
  • D. Virtual network adapter

Answer: A

NEW QUESTION 25
Note This question is part of a series of questions that use the same scenario. For your convenience,
the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of Repeated Scenario:
A company named Contoso, ltd. has several servers that run Windows Server 2016 Contoso has a Hyper V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.
The WSUS deployment contains one upstream server that is located on the company's perimeter network and several downstream servers located on the internal network, A firewall separates the upstream server from the downstream servers.
You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.
The CIO of Contoso identifies the following requirements for the company's IT department:
• Deploy failover cluster to two new virtual machines.
• Store all application databases by using Encrypted File System (EFS).
• Ensure that each Windows container has a dedicated IP address assigned by a DHCP server
• Produce a report that lists the processor time used by all of the processes on a server named Server 1 for five hour.
Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.
• Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.
End of Repeated Scenario.
What should you do to prepare the data volume on HRServer5 to store the databases required for the human resources application?

  • A. Format the data volume by using ReFS.
  • B. Enable Trusted Platform Module (TPM) on HRServer5.
  • C. Format the data volume by using NTFS.
  • D. Enable BitLocker Drive Encryption (BitLocker) on the data volume.

Answer: C

NEW QUESTION 26
You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. Server1
hosts a virtual machine named VM1 that is in a Running state.
On Server1, you export VM1 and then you import VM1 on Server2. What is the current state of VM1 on Server2?

  • A. Off
  • B. Running
  • C. Paused
  • D. Saved

Answer: B

NEW QUESTION 27
Your IT company is constantly changing, with new users coming and going throughout the year.
One of your common tasks requires the deletion of user accounts for employees who have left the company.
Which command can be used to delete user accounts?

  • A. LDIFDE
  • B. Dsmod
  • C. Dspromo
  • D. Netsh

Answer: A

NEW QUESTION 28
Note: This question is part of a series of questions that use the same scenario. For your convenience,
the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of repeated scenario
Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows Server 2016 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.
70-740 dumps exhibit
The virtual machines are configured as follows:
Each virtual machine has one virtual network adapter.
VM1 and VM2 are part of a Network Load Balancing (NLB) cluster.
All of the servers on the network can communicate with all of the virtual machines. End of repeated scenario.
You plan to implement nested virtual machines on VM1.
Which two features will you be prevented from using for VM1?

  • A. NUMA spanning
  • B. live migration
  • C. Dynamic Memory
  • D. Smart Pathing

Answer: BC

Explanation:
References:
https://blogs.technet.microsoft.com/virtualization/2015/10/13/windows-insider-preview-nested-virtualization/

NEW QUESTION 29
......

Recommend!! Get the Full 70-740 dumps in VCE and PDF From Surepassexam, Welcome to Download: https://www.surepassexam.com/70-740-exam-dumps.html (New 331 Q&As Version)