70-741 | Actual 70-741 Braindumps 2019

70-741 exam are updated and 70-741 exam are verified by experts. Once you have completely prepared with our 70-741 exam you will be ready for the real 70-741 exam without a problem. We have 70-741 exam. PASSED 70-741 exam First attempt! Here What I Did.

Free demo questions for Microsoft 70-741 Exam Dumps Below:

NEW QUESTION 1
Your company owns the public Internet IP address range of 131.107.20.0 to 131.107.20.255.
You need to create a subnet that supports four hosts. The solution must minimize the number of addresses available to the subnet.
Which subnet should you use?

  • A. 131.107.20.16 with subnet mask 255.255.255.248
  • B. 131.107.20.16/28
  • C. 131.107.20.0/27
  • D. 131.107.20.16/30

Answer: A

NEW QUESTION 2
You have multiple servers that run Windows Server 2016. You have a server named Server1 that is configured as a domain controller and a DNS server.
You need to create an Active Directory-integrated zone on Server1. What should you run?

  • A. dism.exe
  • B. dns.exe
  • C. dnscmd.exe
  • D. netsh.exe
  • E. Set-DhcpServerDatabase
  • F. Set-DhcpServerv4DnsSetting
  • G. Set-DhcpServerv6DnsSetting
  • H. Set-DNSServerSetting

Answer: C

NEW QUESTION 3
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of the repeated scenario
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets. The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.
70-741 dumps exhibit
Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table.
70-741 dumps exhibit
End of the repeated scenario
You need to configure an administrator named admin@fabrikam.com as the contact person for the fabrikam.com zone.
What should you modify? To answer, select the appropriate options in the answer area.
70-741 dumps exhibit

    Answer:

    Explanation: References: https://www.microsoftpressstore.com/articles/article.aspx?p=2756482&seqNum=2

    NEW QUESTION 4
    On a DNS server that runs Windows Server 2016, you plan to create two new primary zones named adatum.com and contoso.com. You have the following requirements for the zones:
    • Ensure that computers on your network can register records automatically in the adatum.com zone.
    • Ensure that records that are stale for two weeks are purged automatically from the contoso.com zone. What command should you run? To answer, select the appropriate options in the answer area.
    70-741 dumps exhibit

      Answer:

      Explanation: Set-DnsServerForwarder –UseRootHint $false
      References:
      https://docs.microsoft.com/en-us/powershell/module/dnsserver/set-dnsserverforwarder?view=win10-ps

      NEW QUESTION 5
      Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
      After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
      Your network contains an Active Directory forest named contoso.com. The forest has three sites located in
      London, Paris, and Berlin.
      The London site contains a web server named Web1 that runs Windows Server 2016.
      You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
      Solution: You install the Static Content role service, and then you restart the IIS Admin Service. Does this meet the goal?

      • A. Yes
      • B. No

      Answer: B

      NEW QUESTION 6
      Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
      Refer to exhibit:
      70-741 dumps exhibit
      Server1 has two virtual machines named VM1 and VM that run Windows Server 2016. VM1 connects to Private1. VM2 has two network adapters.
      You need to ensure that VM1 connects to the corporate network by using NAT.
      Solution: You connect VM1 to Inernal1. You run the New-NetNatIpAddress and the New-NetNat cmdlets on Server1. You configure VM1 to use Server1 as the default gateway.
      Does this meet the goal?

      • A. Yes
      • B. No

      Answer: A

      NEW QUESTION 7
      You have a server named Server1 that runs Windows Server 2016. Server1 is located on the perimeter network, and only inbound TCP port 443 is allowed to connect Server1 from the Internet.
      You install the Remote Access server role on Server1.
      You need to configure Server1 to accept VPN connections over port 443.
      Which VPN protocol should you use?

      • A. PPTP
      • B. SSTP
      • C. L2TP
      • D. IKEv2

      Answer: B

      Explanation: https://technet.microsoft.com/en-us/library/dd458955(v=ws.10).aspx

      NEW QUESTION 8
      You have a server named Server1 that has a Server Core installation of Windows Server 2016. Server! is configured to obtain an IP address automatically.
      You need to configure the IPv4 address, netmask, and default gateway manually for a network interface named Ethernet on Server1.
      What should you run?

      • A. ipconfig.exe
      • B. netsh.exe
      • C. Set-NetNat
      • D. Set-NetIPv4Protocol

      Answer: C

      NEW QUESTION 9
      You have a server that is configured as a hosted BranchCache server.
      You discover that a Service Connection Point (SCP) is missing for the BranchCache server. What should you run to register the SCP?

      • A. setspn.exe
      • B. Reset-BC
      • C. ntdsutil.exe
      • D. Enable-BCHostedServer

      Answer: D

      Explanation: https://technet.microsoft.com/en-us/library/jj862376(v=ws.11).aspx

      NEW QUESTION 10
      Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
      Refer to exhibit:
      70-741 dumps exhibit
      Server1 has two virtual machines named VM1 and VM that run Windows Server 2016. VM1 connects to Private1. VM2 has two network adapters.
      You need to ensure that VM1 connects to the corporate network by using NAT.
      Solution: You connect VM2 to Private1 and External1. You install the Remote Access server on VM2, and you configure NAT in the Routing and Remote Access console. You configure VM1 and VM2 as the default gateway.
      Does this meet the goal?

      • A. Yes
      • B. No

      Answer: B

      NEW QUESTION 11
      Refer to Exhibit:
      70-741 dumps exhibit
      You plan to implement a VPN. FabRA1 will use the RADIUS proxy for authentication.
      You need to ensure that VPN clients can be authenticated and can access internal resources. The solution must ensure that FabRS1 is used as a RADIUS server and FabRPl is used as a RADIUS proxy.
      Which two actions should you perform? Each correct answer presents part of the solution.

      • A. Create a connection request policy on FabRSl.
      • B. Create a connection request policy on FabRPl.
      • C. Create a network policy on FabRSl.
      • D. Delete the default connection request policy on FabRSl.
      • E. Create a network policv on FabRPl.

      Answer: BC

      NEW QUESTION 12
      Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals. Some question sets might
      have more than one correct solution, while others might not have a correct solution.
      After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
      Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
      On Server1, you have the following zone configuration.
      70-741 dumps exhibit
      You need to ensure that all of the client computers in the domain perform DNSSEC validation for the fabrikam.com namespace.
      Solution: From Windows PowerShell on Server1, you run the Export-DnsServerDnsSecPublicKey cmdlet. Does this meet the goal?

      • A. Yes
      • B. No

      Answer: B

      Explanation: References:
      https://docs.microsoft.com/en-us/powershell/module/dnsserver/export-dnsserverdnssecpublickey?view=win10-p

      NEW QUESTION 13
      Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
      After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
      You have a server named Server1 that has the Network Policy and Access Services server role installed. You create a Shared Secret Network Policy Server (NPS) template named Template1.
      You need to view the shared secret string used for Template1.
      Solution: From the Network Policy Server console, you export the templates, and you view the exported XML file.
      Does this meet the goal?

      • A. Yes
      • B. No

      Answer: B

      NEW QUESTION 14
      Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
      Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
      On Server1, you have the following zone configuration.
      70-741 dumps exhibit
      You have the following subnets defined on Server1.
      70-741 dumps exhibit
      You need to prevent Server1 from resolving queries from DNS clients located on Subnet4. Server1 must resolve queries from all other DNS clients.
      Solution: From Windows Firewall with Advanced Security on Server1, you create an inbound rule. Does this meet the goal?

      • A. Yes
      • B. No

      Answer: B

      Explanation: https://technet.microsoft.com/en-us/library/dd421709(v=ws.10).aspx

      NEW QUESTION 15
      You are implementing a secure network. The network contains a DHCP server named Server1 that runs Windows Server 2016.
      You create a DHCP allow filter that contains all of the computers on the network that are authorized to receive IP addresses.
      You discover that unauthorized computers can obtain an IP address from Server1.
      You need to ensure that only authorized computers can receive an IP address from Server1. Solution: You run the following command.
      Add-DHCPServer4Filter -ComputerName Server1 -MacAddress -List Deny
      Does this meet the goal?

      • A. Yes
      • B. No

      Answer: B

      Explanation: References:
      https://docs.microsoft.com/en-us/powershell/module/dhcpserver/add-dhcpserverv4filter?view=win10-ps

      NEW QUESTION 16
      Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
      After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
      You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.
      Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.
      You open the DHCP console as shown in the exhibit.
      70-741 dumps exhibit
      You need to ensure that all of the Windows 10 computers can receive a DHCP lease.
      Solution: You authorize the server. Does this meet the goal?

      • A. Yes
      • B. No

      Answer: B

      NEW QUESTION 17
      You have an Active Directory forest that contains 30 servers and 6,000 Client computers. You deploy a new DHCP server that runs Windows Server 2016. You need to retrieve the list of the authorized DHCP servers. Which command should you run?

      • A. Get-DHCPServerDatabase
      • B. Netstat -p IP -s -a
      • C. Get-DHCPServerInDc
      • D. Show-ADAuthenticationPolicyExpression -AllowedToAuthenticateTo

      Answer: C

      Explanation: To get all authorized DHCP servers in Active Directory, you can use the following PowerShell cmdlet:
      Get-DhcpServerinDC

      NEW QUESTION 18
      Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 and a member server named Server2.
      Server1 has the DNS Server role installed. Server2 has IP Address Management (IPAM) installed. The IPAM server retrieves zones from Server1 as shown in the following table.
      70-741 dumps exhibit
      The IPAM server has one access policy configured as shown in the exhibit. (Click the Exhibit button.)
      70-741 dumps exhibit
      For each of the following statements, select Yes if the statement is true. Otherwise, select No.
      70-741 dumps exhibit

        Answer:

        Explanation: Box 1: Yes
        As a member of the IPAM DNS Administrator Role of the ADatum zone, User1 can add DNS records to it. Box 2: Yes
        As a member of the DNS Record Administrator Role of the Fabrikam zone, User1 can add DNS records to it. Box 3: No
        DNS Record Administrators cannot delete zones, only administer DNS records. References: https://technet.microsoft.com/en-us/library/hh831353(v=ws.11).aspx

        NEW QUESTION 19
        You have multiple subnets.
        On one of the subnets, you install a server named Server1 that runs Windows Server 2016. Server1 has the following IPv6 addresses:
        70-741 dumps exhibit ff00:e378:8000::63bf:3fff:fdd2
        70-741 dumps exhibit fe80::200:5aee:feaa:20a2
        70-741 dumps exhibit fc00:fdf8:f53b:82e4::53
        70-741 dumps exhibit 2000:1516::6c:2348
        Which IPv6 address is used when Server1 communicates with different hosts? To answer, select the appropriate options in the answer area.
        70-741 dumps exhibit

          Answer:

          Explanation: References: https://technet.microsoft.com/pt-pt/library/cc757359(v=ws.10).aspx

          NEW QUESTION 20
          Your company has 10 offices. Each office has a local network that contains several Hyper-V hosts that run Windows Server 2016. All of the offices are connected by high speed, low latency WAN links.
          You need to ensure that you can use QoS policies for Live Migration traffic between the offices. Which component should you install?

          • A. the Data Center Bridging feature
          • B. the Routing role service
          • C. the Network Controller server role
          • D. the Multipath I/O feature
          • E. the Canary Network Diagnostics feature

          Answer: D

          Explanation: https://technet.microsoft.com/en-us/library/jj735302(v=ws.11).aspx

          P.S. Easily pass 70-741 Exam with 235 Q&As Certifytools Dumps & pdf Version, Welcome to Download the Newest Certifytools 70-741 Dumps: https://www.certifytools.com/70-741-exam.html (235 New Questions)