70-741 | Tested 70-741 Braindumps 2019

Act now and download your 70-741 dumps today! Do not waste time for the worthless 70-741 exam tutorials. Download 70-741 dumps with real questions and answers and begin to learn 70-741 dumps with a classic professional.

Free 70-741 Demo Online For Microsoft Certifitcation:

NEW QUESTION 1
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration.
70-741 dumps exhibit
You need to ensure that all of the client computers in the domain perform DNSSEC validation for the fabrikam.com namespace.
Solution: From Windows PowerShell on Server1, you run the Add-DnsServertrustAnchor cmdlet. Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

Explanation: The Add-DnsServerTrustAnchor command adds a trust anchor to a DNS server. A trust anchor (or trust “point”) is a public cryptographic key for a signed zone. Trust anchors must be configured on every
non-authoritative DNS server that will attempt to validate DNS data. Trust Anchors have no direct relation to
DSSEC validation.
References:
https://technet.microsoft.com/en-us/library/jj649932.aspx https://technet.microsoft.com/en-us/library/dn593672(v=ws.11).aspx

NEW QUESTION 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London, Paris and Berlin.
The London site contains a web server named Web1 that runs Windows Server 2016.
You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
Solution: You install the DFS Replication role service, and then you start the Network Connections service. Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

NEW QUESTION 3
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named adatum.com. The domain contains two DHCP servers named Server1 and Server2.
Server1 has the following IP configuration.
70-741 dumps exhibit
Server2 has the following IP configuration.
70-741 dumps exhibit
Some users report that sometimes they cannot access the network because of conflicting IP addresses. You need to configure DHCP to avoid leasing addresses that are in use already.
Solution: On Server2, you modify the StartRange IP address of the scope. Does this meet the goal?

  • A. Yes
  • B. No

Answer: A

NEW QUESTION 4
Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server4, and Server5 that run Windows Server 2016.
Distributed File System (DFS) is deployed as shown in the DFS Configuration exhibit. (Click the Exhibit button.)
70-741 dumps exhibit
You configure the replication schedule for \\Contoso.com\Namespace1\Folder1 as shown in the Replication Schedule exhibit. (Click the Exhibit button.)
70-741 dumps exhibit
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphics.
70-741 dumps exhibit

    Answer:

    Explanation: The Replicated Folder (Folder1) refers to the name of the DFS target, not the name of the local folder. It does not matter if the local folder name does not match the name of the DFS target. Therefore, replication will work as normal according to the configured schedule.

    NEW QUESTION 5
    Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016.
    Server1 has Microsoft System Center 2016 Virtual Machine Manager (VMM) installed. Server2 has IP Address Management (IPAM) installed.
    You create a domain user named User1.
    You need to integrate IPAM and VMM. VMM must use the account of User1 to manage IPAM. The solution must use the principle of least privilege.
    What should you do on each server? To answer, select the appropriate options in the answer area.
    70-741 dumps exhibit

      Answer:

      Explanation: On Server1: Create a Run As Account that uses User1.
      On Server2: Add User1 to IPAM ASM Administrator Role. https://technet.microsoft.com/en-us/library/dn783349(v=ws.11).aspx https://technet.microsoft.com/en-us/library/jj878348(v=ws.11).aspx

      NEW QUESTION 6
      You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has two network adapters that are Remote Direct Memory Access (RDMA)-enabled.
      You need to verify whether Switch Embedded Teaming (SET) is enabled. Which cmdlet should you use?

      • A. Get-NetworkSwitchFeature
      • B. Get-VMNetworkAdapter
      • C. Get-VMSwitch
      • D. Get-VMNetworkAdapterFailoverConfiguration

      Answer: C

      NEW QUESTION 7
      You have a DHCP server named Server1.
      Server1 has an IPv4 scope that serves 75 client computers that run Windows 10.
      When you review the address leases in the DHCP console, you discover several leases for devices that you do not recognize.
      You need to ensure that only the 75 Windows 10 computers can obtain a lease from the scope. What should you do?

      • A. Run the Add-DhcpServerv4ExclusionRange cmdlet.
      • B. Create and enable a DHCP filter.
      • C. Create a DHCP policy for the scope.
      • D. Run the Add-DhcpServerv4OptionDefinition cmdlet.

      Answer: A

      Explanation: References: https://technet.microsoft.com/en-us/library/jj590721(v=wps.630).aspx

      NEW QUESTION 8
      You have a Nano Server that has one network interface. The server is configured to obtain an IP address automatically.
      You need to configure the server to have the following IP configurations:
      • IP address 172.16.3.100
      • Default gateway: 172.163.1
      • Subnet mask: 255.255.255.0
      What command should you run? To answer, select the appropriate options in the answer area.
      70-741 dumps exhibit

        Answer:

        Explanation: References: https://docs.microsoft.com/en-us/powershell/module/nettcpip/new-netipaddress?view=win10-ps

        NEW QUESTION 9
        Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
        Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.
        The network uses an address space of 192.168.0.0/16 and contains multiple subnets. The network is not connected to the Internet.
        The domain contains three servers configured as shown in the following table.
        70-741 dumps exhibit
        Client computers obtain TCP/IP settings from Server3.
        You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.
        Server1 has four DNS zones configured as shown in the following table.
        70-741 dumps exhibit
        You need to ensure that when a record is added dynamically to fabrikam.com, only the computer that created the record can modify the record. The solution must allow administrators to modify all of the records in fabrikam.com.
        What should you do?

        • A. Change fabrikam.com to an Active Directory-integrated zone.
        • B. Raise the functional level of the domain.
        • C. Modify the security settings of the Fabrikam.com.dns file.
        • D. Modify the Start of Authority (SOA) settings of fabrikam.com

        Answer: A

        Explanation: https://technet.microsoft.com/en-us/library/cc753751(v=ws.11).aspx

        NEW QUESTION 10
        You have a server named Server1 that runs Windows Server 2016. Server1 is in a workgroup and has the DNS Server role installed. You need to enable DNS analytical diagnostic logging on Server1. What should you do?

        • A. From Local Group Policy Editor, configure Audit Policy.
        • B. From DNS Manager, configure Monitoring.
        • C. From Windows PowerShell, run the Enable-DnsServerPolicy cmdlet.
        • D. From DNS Manager, configure Event Logging.
        • E. From Event Viewer, configure DNS-Server Applications and Services Logs.

        Answer: E

        Explanation: References:
        https://www.yourdigitalmind.com/tutorials/how-to-enable-dns-logging-and-diagnostics-in-windows-server-2012

        NEW QUESTION 11
        You have a DHCP server named Server1 that runs Windows Server 2016. You have a single IP subnet.
        Server1 has an IPv4 scope named Scope1. Scope1 has an IP address range of 10.0.1.10 to 10.0.1.200 and a length of 24 bits.
        You need to create a second logical IP network on the subnet. The subnet will use an IP address range of
        10.1.2.10 to 10.0.2.200 and a length of 24 bits.
        What should you do?

        • A. Create a second scope, and then create a superscope.
        • B. Create a superscope, and then configure an exclusion range in Scope1.
        • C. Create a new scope, and then modify the IPv4 bindings.
        • D. Create a second scope, and then run the DHCP Split-Scope Configuration Wizard.

        Answer: A

        NEW QUESTION 12
        You have multiple servers that run Windows Server 2016.
        You need to install the DNS Server server role on one of the servers. What should you run?

        • A. dism.exe
        • B. dns.exe
        • C. dnscmd.exe
        • D. netsh.exe
        • E. Set-DhcpServerDatabase
        • F. Set-DhcpServerv4DnsSetting
        • G. Set-DhcpServerv6DnsSetting
        • H. Set-DNSServerSetting

        Answer: A

        NEW QUESTION 13
        Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
        You have a DHCP server named Server1 that has an IPv4 scope named Scope1.
        Users report that when they turn on their client computers, it takes a long time to access the network. You validate that it takes a long time for the computers to receive an IP address from Server1.
        You monitor the network traffic and discover that Server1 issues five ping commands on the network before leasing an IP address.
        You need to reduce the amount of time it takes for the computers to receive an IP address. What should you do?

        • A. From the properties of Scope1, modify the Conflict detection attempts setting.
        • B. From the properties of Scope1, configure Name Protection.
        • C. From the properties of IPv4, configure the bindings.
        • D. From IPv4, create a new filter.
        • E. From the properties of Scope1, create an exclusion range.
        • F. From IPv4, run the DHCP Policy Configuration Wizard.
        • G. From Control Panel, modify the properties of Ethernet.
        • H. From Scope1, create a reservation.

        Answer: A

        Explanation: https://technet.microsoft.com/en-us/library/ee941125(v=ws.10).aspx

        NEW QUESTION 14
        Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016.
        Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2.
        You create a domain user account named User1.
        You need to ensure that User1 can use IPAM to manage DHCP.
        Which command should you run on Server1? To answer, select the appropriate options in the answer area.
        70-741 dumps exhibit

          Answer:

          Explanation: 70-741 dumps exhibit

          NEW QUESTION 15
          Your network contains an Active Directory domain. The domain contains a certification authority (CA) and a Network Policy Server (NPS) server.
          You plan to deploy Remote Access Always On VPN. Which authentication method should you use?

          • A. Microsoft: EAP-TTLS
          • B. Microsoft: Secured password
          • C. Microsoft: Protected EAP
          • D. Microsoft: EAP-AKA

          Answer: C

          NEW QUESTION 16
          You network contains an Active Directory named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016.
          Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2.
          The domain has two users named User1 and User2 and a group named Group1. User1 is the only member of Group1.
          Server1 has one IPAM access policy. You edit the access policy as shown in the Policy exhibit. (Click the Exhibit button.)
          70-741 dumps exhibit
          The DHCP scopes are configured as shown in the Scopes Exhibit. (Click the Exhibit button.)
          70-741 dumps exhibit
          For each of the following statements, select Yes if the statement is true. Otherwise, select No.
          70-741 dumps exhibit

            Answer:

            Explanation: https://technet.microsoft.com/en-us/library/dn268500(v=ws.11).aspx

            NEW QUESTION 17
            Your company has two main offices. The offices are located in London and Seattle. All servers run Windows Server 2016.
            In the Seattle office, you have a Distributed File System (DFS) server named FS1. FS1 has a folder named Folder1 that contains large Windows image files.
            In the London office, you deploy a DFS server named FS2, and you then replicate Folder1 to FS2. After several days, you discover that the replication of certain files failed to complete.
            You need to ensure that all of the files in Folder1 can replicate to FS2. What should you do?

            • A. Modify the disk quota of the drive that contains Folder1.
            • B. From a command prompt, run dfsutil /purgemupcache.
            • C. Create a quota for Folder1 by using File Server Resource Manager (FSRM).
            • D. Modify the size of staging area of Folder1.

            Answer: C

            Explanation: https://technet.microsoft.com/en-us/library/hh831487(v=ws.11).aspx

            NEW QUESTION 18
            You have two servers named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 have the Network Policy Server role service installed.
            Server1 is configured to forward connection requests to Server2.
            Incoming connection requests to Server1 contain the User Name attribute. The User Name attribute does not contain the domain name suffix.
            You need to ensure that the User Name attribute will be replaced by using a format of username@contoso.com.
            How should you configure the attribute manipulation role on Server1? To answer, select the appropriate options in the answer area.
            NOTE: Each correct selection is worth one point.
            70-741 dumps exhibit

              Answer:

              Explanation: 70-741 dumps exhibit

              NEW QUESTION 19
              Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
              After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
              You have a Hyper-V host named Server 1. The network adapters on Server1 have single root I/O virtualization (SR-IOV) enabled.
              Server1 hosts a virtual machine named VM1 that runs Windows Server 2016. You need to identify whether SR-IOV is used by VM1.
              Solution: You sign in to VM1. You open Device Manager and view the properties of the network adapters.
              Does this meet the goal?

              • A. Yes
              • B. No

              Answer: B

              NEW QUESTION 20
              You have two DNS servers named Server1 and Server2.
              All client computers run Windows 10 and are configured to use Server1 for DNS name resolution. Server2 hosts a primary zone named contoso.com.
              Your network recently experienced several DNS spoofing attacks on the contoso.com zone. You need to prevent further attacks from succeeding.
              What should you do on Server??

              • A. Configure the contoso.com zone to be Active Directory-integrated.
              • B. Sign the contoso.com zone.
              • C. Configure DNS-based Authentication of Named Entities (DANE) for the contoso.com zone.
              • D. Configure Response Rate Limiting (RRL).

              Answer: B

              P.S. Easily pass 70-741 Exam with 235 Q&As Simply pass Dumps & pdf Version, Welcome to Download the Newest Simply pass 70-741 Dumps: https://www.simply-pass.com/Microsoft-exam/70-741-dumps.html (235 New Questions)