70-741 | Validated 70-741 Braindumps 2019

Proper study guides for 70-741 Networking with Windows Server 2016 certified begins with 70-741 dumps preparation products which designed to deliver the 70-741 dumps by making you pass the 70-741 test at your first time. Try the free 70-741 exam right now.

Check 70-741 free dumps before getting the full version:

NEW QUESTION 1
Scenario:
You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.
70-741 dumps exhibit
You install the Remote Access server role on Server2. Server2 has the following configured.
*Network address translation (NAT)
*The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2 You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.
End of Scenario:
You deploy a computer named Computer8 to subnet4. Computer8 has an IP address of 192.168.10.230 and a subnet mask of 255.255.255.240
What is the broadcast address for Subnet4? To answer, select the appropriate options in the answer area.
70-741 dumps exhibit

    Answer:

    Explanation: 70-741 dumps exhibit

    NEW QUESTION 2
    Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
    Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
    On Server1, you have the following zone configuration.
    70-741 dumps exhibit
    You have the following subnets defined on Server1.
    70-741 dumps exhibit
    You need to prevent Server1 from resolving queries from DNS clients located on Subnet4. Server1 must resolve queries from all other DNS clients.
    Solution: From Windows PowerShell on Server1, you run the Add-DnsServerQueryResolutionPolicy cmdlet. Does this meet the goal?

    • A. Yes
    • B. No

    Answer: A

    Explanation: https://technet.microsoft.com/en-us/itpro/powershell/windows/dns-server/add-dnsserverqueryresolutionpolicy

    NEW QUESTION 3
    You have a DNS server named Server1 that runs Windows Server 2016. Server 1 has a forward lookup scope for Contoso.com. The records in the zone are shown in the exhibit. (Click the Exhibit button.)
    Exhibit:
    70-741 dumps exhibit
    You run the following commands on Server1.
    70-741 dumps exhibit
    What are two results of the configuration? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

    • A. When a client computer that has an IP address of 172.16.0.10 attempts to resolve host1.contoso.com, host1.contoso.com resolves to 172.16.99.99.
    • B. When a client computer that has an IP address of 172.16.0.10 attempts to resolve host1.contoso.com, the name resolution fails to return an IP address.
    • C. When a client computer that has an IP address of 172.16.1.56 attempts to resolve host1.contoso.com, host1.contoso.com resolves to 172.16.99.99.
    • D. When a client computer that has an IP address of 172.16.1.56 attempts to resolve host1.contoso.com, host1.contoso.com resolves to 172.16.0.100.
    • E. When a client computer that has an IP address of 172.16.1.56 attempts to resolve host1.contoso.com, the name resolution fails to return an IP address.
    • F. When a client computer that has an IP address of 172.16.0.10 attempts to resolve host1.contoso.com, host1.contoso.com resolves to 172.16.0.100.

    Answer: BE

    Explanation: References:
    https://docs.microsoft.com/en-us/powershell/module/dnsserver/add-dnsserverqueryresolutionpolicy?view=win1

    NEW QUESTION 4
    You have an application named App1. App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment.
    You need to ensure that the traffic is distributed evenly among the virtual machines that host App1.
    What should you include in the environment?

    • A. Network Controller and Windows Server Network Load Balancing (NLB) nodes
    • B. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes
    • C. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes
    • D. Network Controller and Windows Server Software Load Balancing (SLB) nodes

    Answer: B

    Explanation: https://technet.microsoft.com/en-us/library/mt403307(v=ws.11).aspx#bkmk_slb

    NEW QUESTION 5
    You have an IP Address Management (IPAM) server named IPAM1 that runs Window Server 2016. IPAM1 manages all of the DHCP servers on your network.
    You are troubleshooting an issue for a client that fails to receive an IP address from DHCP.
    You need to ensure that from IPAM1, you can view all of the event data for the DHCP leases from the last 24 hours.
    Solution: From Windows PowerShell, you run the Set-IpamDHCPServer cmdlet.
    Does this meet the goal?

    • A. Yes
    • B. No

    Answer: B

    NEW QUESTION 6
    Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. You enable Response Rate Limiting on Server1. You need to prevent Response Rate Limiting from applying to hosts that reside on the network of 10.0.0.0/24. Which
    cmdlets should you run? To answer, select the appropriate options in the answer area.
    70-741 dumps exhibit

      Answer:

      Explanation: Set-DnsServerResponseRateLimiting
      Add-DnsServerResponseRateLimitingExceptionlist
      https://docs.microsoft.com/en-us/powershell/module/dnsserver/set-dnsserverresponseratelimiting?view=win10-p

      NEW QUESTION 7
      You have a test environment that includes two servers named Server1 and Server2. The severs run Windows Server 2016. You need to ensure that you can implement SMB Direct between the servers. Which feature should the servers support?

      • A. (RDMA)
      • B. Multipath I/O (MPIO)
      • C. virtual machine queue (VMQ)
      • D. single root I/O virtualization (SR-IOV)

      Answer: A

      Explanation: https://technet.microsoft.com/en-us/library/jj134210%28v=ws.11%29.aspx?f=255&MSPPError=-2147217396

      NEW QUESTION 8
      You use a Network Policy Server (NPS) server named NPS1 to authenticate VPN connections and connections to wireless access points (WAPs).
      You plan to add a new WAP named WAP1.
      What should you do on WAP1 and NPS1? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
      70-741 dumps exhibit

        Answer:

        Explanation: References:
        https://docs.microsoft.com/en-us/windows-server/networking/core-network-guide/cncg/wireless/e-wireless-acce

        NEW QUESTION 9
        You have an Active Directory domain named Contoso.com. The domain contains servers named Server1 and Server2 that run Windows Server 2016.
        You install the Remote Access server role on Server1. You install the Network Policy and Access Services server role on Server2.
        You need to configure Server1 to use Server2 as a RADIUS server. What should you do?

        • A. From the Connection Manager Administration Kit, create a Connection Manager profile.
        • B. From Routing and Remote Access, configure the authentication provider.
        • C. From Active Directory Users and Computers, modify the Delegation settings of the Server1 computer account.
        • D. From Server Manager, create an Access Policy.

        Answer: D

        Explanation: http://www.nyazit.com/configure-network-policy-server-2016/

        NEW QUESTION 10
        Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
        After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
        You have a Hyper-V host named Server 1. The network adapters on Server1 have single root I/O virtualization (SR-IOV) enabled.
        Server1 hosts a virtual machine named VM1 that runs Windows Server 2016. You need to identify whether SR-IOV is used by VM1.
        Solution: On Server1, you open Hyper-V Manager and view the Integration Services settings of VM1.
        Does this meet the goal?

        • A. Yes
        • B. No

        Answer: B

        NEW QUESTION 11
        You have a virtual machine named VM1 that runs Windows Server 2016. VM1 is a Remote Desktop Services (RDS) server.
        You need to ensure that only TCP port 3389 can be used to connect to VM1 over the network.
        Which command should you run on the Hyper-V host? To answer, select the appropriate options in the answer area.
        70-741 dumps exhibit

          Answer:

          Explanation: References:
          https://technet.microsoft.com/en-us/library/dn464289.aspx

          NEW QUESTION 12
          You have a server named Server1 that runs Windows Server 2016.
          Server1 has two network cards. One network card connects to your internal network and the other network card connects to the Internet.
          You plan to use Server1 to provide Internet connectivity for client computers on the internal network. You need to configure Server1 as a network address translation (NAT) server.
          Which server role or role service should you install on Server1 first?

          • A. Network Controller
          • B. Web Application Proxy
          • C. Routing
          • D. DirectAccess and VPN (RAS)

          Answer: C

          NEW QUESTION 13
          You have a server named Server1 that has a Server Core installation of Windows Server 2016. Server1 is configured to obtain an IP address automatically.
          You need to configure the IPv4 address, netmask, and default gateway manually for a network interface named Ethernet on Server1.
          What should you run?

          • A. ipconfig.exe
          • B. New-NetiPAddress
          • C. Set-NetAdapter
          • D. Set-NetIPv4Protocol

          Answer: B

          Explanation: References:
          https://docs.microsoft.com/en-us/powershell/module/nettcpip/new-netipaddress?view=win10-ps

          NEW QUESTION 14
          You need to implement network virtualization.
          On which object should you configure the virtual subnet ID?

          • A. Virtual switch
          • B. Hyper-V server
          • C. VM
          • D. Virtual network adapter

          Answer: D

          NEW QUESTION 15
          You have three servers named Server1, Server2, and Server3 that run Windows Server 2016. On all three servers, Windows Firewall is configured to allow ICMP traffic. Server2 has two network adapters named NIC1 and NIC2.
          Your network is configured as shown in the exhibit. (Click the Exhibit button.)
          70-741 dumps exhibit
          The parameters for NIC2 on Server1 are shown in the following output.
          70-741 dumps exhibit
          Which ping request will result in a reply from the destination host?

          • A. From Server2, ping 192.168.15.1
          • B. From Server3, ping 192.168.15.1
          • C. From Server1, ping 172.16.0.1
          • D. From Server1, ping 172.16.0.35

          Answer: A

          NEW QUESTION 16
          You have a DNS server named Server1 that runs Windows Server 2016. Server1 has an Active Directory-integrated zone named adatum.com.
          All client computers run Windows 10.
          You recently encountered unexpected responses to DNS client queries in the adatum.corn zone. You need to log all the records written to the zone.
          Which cmdlet should you run?

          • A. Set-DnsServerDsSetting
          • B. Set-DnsServerDiagnostics
          • C. Set-DnsServer
          • D. Add-DnaServerQueryResolutionPolicy

          Answer: B

          NEW QUESTION 17
          You have a server named Server1 that runs Windows Server 2016. Server1 is an IP Address Management (IPAM) server that collects DHCP and DNS logs and events for your entire network.
          You need to get the IP addresses that were assigned to a client computer named Computer1 during the last week.
          What should you do on Server1?

          • A. Open Event Viewer and click Windows Log
          • B. Filter the Security log for Computer1.
          • C. From the IPAM node in Server Manager, click Event Catalog, and then review the IP Address Tracking.
          • D. Run the Get-IpamDhcpConfigurationEvent cmdlet.
          • E. Open Event Viewer and click Windows Log
          • F. Filter the Forwarded Events log for Computer1.

          Answer: C

          Explanation: References:
          https://docs.microsoft.com/en-us/powershell/module/ipamserver/get-ipamipaddressauditevent?view=win10-ps

          NEW QUESTION 18
          Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
          After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
          You network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2016 and has the DNS Server role installed. Automatic scavenging of state records is enabled and the scavenging period is set to 10 days.
          All client computers dynamically register their names in the contoso.com DNS zone on Server1.
          You discover that the names of multiple client computers that were removed from the network several weeks ago can still be resolved.
          You need to configure Server1 to automatically remove the records of the client computers that have been offline for more than 10 days.
          Solution: You set the Expires after value of the zone. Does this meet the goal?

          • A. Yes
          • B. No

          Answer: B

          Explanation: https://technet.microsoft.com/en-us/library/cc772069(v=ws.11).aspx

          NEW QUESTION 19
          Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
          After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
          Your network contains an Active Directory domain named adatum.com. The domain contains two DHCP servers named Server1 and Server2.
          Server1 has the following IP configuration.
          70-741 dumps exhibit
          Server2 has the following IP configuration.
          70-741 dumps exhibit
          Some users report that sometimes they cannot access the network because of conflicting IP addresses. You need to configure DHCP to avoid leasing addresses that are in use already.
          Solution: On Server1, you modify the EndRange IP address of the scope. Does this meet the goal?

          • A. Yes
          • B. No

          Answer: A

          NEW QUESTION 20
          You have a server named Server1 that runs Windows Server 2016.
          Server1 is an IP Address Management (IPAM) server that collects DHCP and DNS logs and events for your entire network.
          You need to enable a user named TECH1 to create pointer (PTR), host (A) and service location (SRV) records on all of the DNS servers on the network.
          What should you do on Server1?

          • A. From the IPAM node in Server Manager, assign the IPAM DNS Administrator Role to TECH1 and create a new access scope.
          • B. Run the Set-IpamRange cmdlet, and then run the Set-IpamAccessScope cmdlet.
          • C. From the IPAM node in Server Manager, create a new user role and a new access policy.
          • D. Run the Set-IpanCustomFiels cmdelt, and then run the Set-IpamAddressSpace cmdlet.

          Answer: A

          Explanation: References:
          https://docs.microsoft.com/en-us/windows-server/networking/technologies/ipam/view-roles-and-role-permission

          100% Valid and Newest Version 70-741 Questions & Answers shared by Passcertsure, Get Full Dumps HERE: https://www.passcertsure.com/70-741-test/ (New 235 Q&As)