76940X | A Review Of Tested 76940X Simulations

NEW QUESTION 1
An ESXi Host server has been replaced due to a fault.
To provide for this replacement, which portion of the Lifecycle Workbook needs to be updated?

• A. Power Cord Wiring
• B. Serial Numbers
• C. Network Data
• D. Switch Wiring

Answer: B

NEW QUESTION 2
A support engineer has completed the upgrade of a PodFX 3.1 system to ACP 4200 4.0.
What should the engineer do with Virtual Machine snapshots that were created during the upgrade process?

• A. The VM snapshots should be backed up to external storage and deleted immediately.
• B. The VM snapshots should be deleted immediately.
• C. The VM snapshots should be deleted within 72 hours of the verified, successful completion of the upgrade process.
• D. The VM snapshots should be left as they are as a backup of the upgrade process.

Answer: C

NEW QUESTION 3
A support engineer is tasked with upgrading a CPOD 2.1 system to ACP 4200 4.0. Which statement about the upgrade process is true?

• A. Upgrading a CPOD 2.1 system to ACP 4200 4.0 is supported, and a direct upgrade path is supported.
• B. Upgrading a CPOD 2.1 system to ACP 4200 4.0 is supported only if the Rack enclosure is replaced with a new 48 Inch Deep Model.
• C. Upgrading a CPOD 2.1 system to ACP 4200 4.0 is not supported.
• D. Upgrading a CPOD 2.1 system to ACP 4200 4.0 is supported, but a direct upgrade path is only partially supported.

Answer: B

NEW QUESTION 4
Which statement about the LifeCycle Manage Workbook (LCM) and any time there is a change made to the ACP 4200 implementation is true?

• A. The LCM only needs to be updated when hardware devices are changed.
• B. Retrieve the LCM from ACP 4200 support prior to making any changes.
• C. The LCM is only needed when receiving the ACP 4200.
• D. Update the LCM with all changes and submit it via email to podfxsupport@avaya.com.

Answer: D

NEW QUESTION 5
A support engineer is upgrading a PodFX 3.1 system to ACP 4200 4.0. The engineer is upgrading the VMware vCenter Server from Release 6.0 to Release 6.5.
Which two statements about the vSphere Update Manager (VUM) data migration are true? (Choose two.)

• A. The VMware-Migration-Assistant executable file is run on the Management Server Console where the current version of VUM is currently running.
• B. The VMware-Migration-Assistant executable file is run on the ESXi host where the current version of VUM is currently running.
• C. VUM data migration is optional.
• D. VUM data migration is mandatory.

Answer: AD

NEW QUESTION 6
What is the first step in upgrading the VSP switches in an Avaya ACP 4200?

• A. Verify redundancy is active.
• B. Power down secondary device.
• C. Verify connectivity to NTP server.
• D. Disable Telnet access.

Answer: A

NEW QUESTION 7
Which two upgrade tasks are required before upgrading the ESXi servers to 6.5? (Choose two.)

• A. Upgrade the HP Server iLO firmware.
• B. Upgrade the PDU firmware.
• C. Upgrade the switch firmware.
• D. Upgrade the HP Server firmware.

Answer: AC

NEW QUESTION 8
A PodFX system is being upgraded to ACP 4.0 and Avaya Orchestrator needs to have an IP address assigned. What would Avaya recommend for Orchestrator’s IP address?

• A. Assign an unused IP address in the Management VLAN range for the Orchestrator.
• B. Re-use the PVM IP address for Orchestrator.
• C. Re-use the VPFM IP addresses for Orchestrator.
• D. There is no recommendation on which IP address to use for Orchestrator.

Answer: A

NEW QUESTION 9
Which equipment is standard in a new ACP 4200 4.0?

• A. IP 7254
• B. VSP 4850
• C. IP 8284
• D. VSP 7024

Answer: B

NEW QUESTION 10
Which benefit does the available G450 Gateway provide to the ACP 4200 solution?

• A. IP to H.323 translation
• B. SIP to IP transition
• C. IP to POTS transition
• D. SIP to SIP negotiation

Answer: B

NEW QUESTION 11
While configuring the MSC to use NTP you see the NTP synching fail. What is the most common cause of this problem?

• A. VMware is not supporting NTP.
• B. The VSPs are rejecting the NTP messages.
• C. The NTP server is installed outside of the ACP 4200.
• D. The customer has a firewall between the MSC and the customer’s NTP server.

Answer: B

NEW QUESTION 12
What does it mean when a support engineer clicks on the Latest Alerts link in Orchestrator and finds that there are no alerts listed?

• A. There are no Hosts or Services that have been in Warning or Critical state in the past 7 days.
• B. There are no Hosts or Services that have been in Warning or Critical state in the past 24 hours.
• C. There are no Hosts or Services that have been in Warning or Critical state in the past 4 hours.
• D. There are no Hosts or Services that are currently in Warming or Critical state.

Answer: D

NEW QUESTION 13
What would a support engineer expect to find when using MSC to support, troubleshoot and maintain the ACP 4200 4.0?

• A. All current and previous license files
• B. Software library store
• C. Pod Upgrade Manager (PUM)
• D. VMware vSphere client application for VMware 6.5

Answer: D

NEW QUESTION 14
To view a graphical representation of the ACP 4200 and its individual components, where would a support engineer navigate?

• A. System Manager > Inventory
• B. Pod Visualization Manager > Home Dashboard
• C. Servertech PDU Web Interface > Equipment View
• D. Avaya Orchestrator > Rack Dashboard

Answer: B

NEW QUESTION 15
As part of the upgrade of a PodFX 3.1 system to ACP 4200 4.0, a support engineer is tasked with upgrading the ESXi hosts to VMware ESXi 6.5.
Where would the engineer obtain the necessary upgrade files?

• A. From the Avaya support website
• B. From the VMware support website
• C. From the ACP 4.0 Upgrade DVD media
• D. From the HP support website

Answer: C

NEW QUESTION 16
......