AZ-100 | Validated AZ-100 Dumps 2019

It is impossible to pass Microsoft AZ-100 exam without any help in the short term. Come to us soon and find the most advanced, correct and guaranteed AZ-100 Exam Questions and Answers. You will get a surprising result by our AZ-100 Dumps Questions.

Online Microsoft AZ-100 free dumps demo Below:

NEW QUESTION 1
Your company registers a domain name of contoso.com.
You create an Azure DNS named contoso.com and then you add an A record to the zone for a host named www that has an IP address of 131.107.1.10.
You discover that Internet hosts are unable to resolve www.contoso.com to the 131.107.1.10 IP address. You need to resolve the name resolution issue.
Solution: You modify the name server at the domain registrar. Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

Explanation: Modify the Name Server (NS) record.
References: https://docs.microsoft.com/en-us/azure/dns/dns-delegate-domain-azure-dns

NEW QUESTION 2
You have an Azure subscription named Subscription1.
In Subscription1, you create an Azure file share named share1.
You create a shared access signature (SAS) named SAS1 as shown in the following exhibit.
AZ-100 dumps exhibit
To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
AZ-100 dumps exhibit

    Answer:

    Explanation: Box 1: Will be prompted for credentials
    Azure Storage Explorer is a standalone app that enables you to easily work with Azure Storage data on Windows, macOS, and Linux. It is used for connecting to and managing your Azure storage accounts.
    Box 2: Will have read, write, and list access
    The net use command is used to connect to file shares. References:
    https://docs.microsoft.com/en-us/azure/storage/common/storage-dotnet-shared-access-signature-part-1 https://docs.microsoft.com/en-us/azure/vs-azure-tools-storage-manage-with-storage-explorer?tabs=windows

    NEW QUESTION 3
    Overview
    The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
    Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
    Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
    Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
    To start the lab
    You may start the lab by clicking the Next button.
    You plan to connect several virtual machines to the VNET01-USEA2 virtual network.
    In the Web-RGlod8095859 resource group, you need to create a virtual machine that uses the Standard_B2ms size named Web01 that runs Windows Server 2016. Web01 must be added to an availability set.
    What should you do from the Azure portal?

      Answer:

      Explanation: Step 1. Choose Create a resource in the upper left-hand corner of the Azure portal.
      Step 2. In the Basics tab, under Project details, make sure the correct subscription is selected and then choose Web-RGlod8095859 resource group
      AZ-100 dumps exhibit
      Step 3. Under Instance details type/select: Virtual machine name: Web01
      Image: Windows Server 2016 Size: Standard_B2ms size Leave the other defaults.
      AZ-100 dumps exhibit
      Step 4. Finish the Wizard

      NEW QUESTION 4
      Overview
      The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
      Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
      Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
      Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
      To start the lab
      You may start the lab by clicking the Next button. You plan to host several secured websites on Web01.
      You need to allow HTTPS over TCP port 443 to Web01 and to prevent HTTP over TCP port 80 to Web01. What should you do from the Azure portal?

        Answer:

        Explanation: You can filter network traffic to and from Azure resources in an Azure virtual network with a network security group. A network security group contains security rules that allow or deny inbound network traffic to, or outbound network traffic from, several types of Azure resources.
        A network security group contains security rules that allow or deny inbound network traffic to, or outbound network traffic from, several types of Azure resources.
        Step A: Create a network security group
        A1. Search for and select the resource group for the VM, choose Add, then search for and select Network security group.
        A2. Select Create.
        AZ-100 dumps exhibit
        The Create network security group window opens. A3. Create a network security group
        Enter a name for your network security group.
        Select or create a resource group, then select a location. A4. Select Create to create the network security group.
        Step B: Create an inbound security rule to allows HTTPS over TCP port 443 B1. Select your new network security group.
        B2. Select Inbound security rules, then select Add. B3. Add inbound rule
        B4. Select Advanced.
        From the drop-down menu, select HTTPS.
        You can also verify by clicking Custom and selecting TCP port, and 443. B5. Select Add to create the rule.
        Repeat step B2-B5 to deny TCP port 80
        B6. Select Inbound security rules, then select Add. B7. Add inbound rule
        B8. Select Advanced.
        Clicking Custom and selecting TCP port, and 80. B9. Select Deny.
        Step C: Associate your network security group with a subnet
        Your final step is to associate your network security group with a subnet or a specific network interface. C1. In the Search resources, services, and docs box at the top of the portal, begin typing Web01. When the
        Web01 VM appears in the search results, select it.
        C2. Under SETTINGS, select Networking. Select Configure the application security groups, select the Security Group you created in Step A, and then select Save, as shown in the following picture:
        AZ-100 dumps exhibit
        References:
        https://docs.microsoft.com/en-us/azure/virtual-network/tutorial-filter-network-traffic

        NEW QUESTION 5
        You have an Azure Active Directory (Azure AD) tenant named contoso.onmicrosoft.com that contains 100 user accounts.
        You purchase 10 Azure AD Premium P2 licenses for the tenant.
        You need to ensure that 10 users can use all the Azure AD Premium features. What should you do?

        • A. From the Groups blade of each user, invite the users to a group.
        • B. From the Licenses blade of Azure AD, assign a license.
        • C. From the Directory role blade of each user, modify the directory role.
        • D. From the Azure AD domain, add an enterprise application.

        Answer: B

        Explanation: To assign a license, under Azure Active Directory > Licenses > All Products, select one or more products, and then select Assign on the command bar.
        References: https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/license-users-groups

        NEW QUESTION 6
        Overview
        The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
        Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
        Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
        Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
        To start the lab
        You may start the lab by clicking the Next button. You recently created a virtual machine named Web01.
        You need to attach a new 80-GB standard data disk named Web01-Disk1 to Web01.
        What should you do from the Azure portal?

          Answer:

          Explanation: Add a data disk
          Step 1. In the Azure portal, from the menu on the left, selecVt irtual machines.
          Step 2. Select the Web01 virtual machine from the list.
          Step 3. On the Virtual machine
          page, , in Essentials, selecDt isks.
          AZ-100 dumps exhibit
          Step 4. On the Disks
          page, select the Web01-Disk1 from the list of existing disks.
          Step 5. In the Disks pane, click + Add data disk.
          Step 6. Click the drop-down menu for Name to view a list of existing managed disks accessible to your Azure subscription. Select the managed disk Web01-Disk1 to attach:
          AZ-100 dumps exhibit
          References:
          https://docs.microsoft.com/en-us/azure/virtual-machines/linux/attach-disk-portal

          NEW QUESTION 7
          You plan to use the Azure Import/Export service to copy files to a storage account.
          Which two files should you create before you prepare the drives for the import job? Each correct answer presents part of the solution.
          NOTE: Each correct selection is worth one point.

          • A. an XML manifest file
          • B. a driveset CSV file
          • C. a dataset CSV file
          • D. a PowerShell PS1 file
          • E. a JSON configuration file

          Answer: BC

          Explanation: B: Modify the driveset.csv file in the root folder where the tool resides.
          C: Modify the dataset.csv file in the root folder where the tool resides. Depending on whether you want to import a file or folder or both, add entries in the dataset.csv file
          References: https://docs.microsoft.com/en-us/azure/storage/common/storage-import-export-data-to-files

          NEW QUESTION 8
          Click to expand each objective. To connect to the Azure portal, type https://portal.azure.com in the browser address bar.
          AZ-100 dumps exhibit
          AZ-100 dumps exhibit
          AZ-100 dumps exhibit
          AZ-100 dumps exhibit
          AZ-100 dumps exhibit
          AZ-100 dumps exhibit
          When you are finished performing all the tasks, click the ‘Next’ button.
          Note that you cannot return to the lab once you click the ‘Next’ button. Scoring occur in the background while you complete the rest of the exam.
          Overview
          The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design. Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
          Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to
          ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
          Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
          To start the lab
          You may start the lab by clicking the Next button.
          You plan to deploy several Azure virtual machines and to connect them to a virtual network named VNET1007.
          You need to ensure that future virtual machines in VNET1007 can register their name in an internal DNS zone named corp7523690.com. The zone must NOT be hosted on a virtual machine.
          What should you do from Azure Cloud Shell?
          To complete this task, start Azure Cloud Shell and select PowerShell(Linux). Click Show Advanced Settings, and then enter corp7523690n1 in the Storage account text box and File1 in the File share text box. Click Create storage, and then complete the task.

            Answer:

            Explanation: Step 1: New-AzureRMResourceGroup -name MyResourceGroup
            Before you create the DNS zone, create a resource group to contain the DNS zone.
            Step 2: New-AzureRmDnsZone -Name corp7523690.com -ResourceGroupName MyResourceGroup A DNS zone is created by using the New-AzureRmDnsZone cmdlet. This creates a DNS zone called
            corp7523690.com in the resource group called MyResourceGroup.
            References: https://docs.microsoft.com/en-us/azure/dns/dns-getstarted-powershell

            NEW QUESTION 9
            Click to expand each objective. To connect to the Azure portal, type https://portal.azure.com in the browser address bar.
            AZ-100 dumps exhibit
            AZ-100 dumps exhibit
            AZ-100 dumps exhibit
            When you are finished performing all the tasks, click the ‘Next’ button.
            Note that you cannot return to the lab once you click the ‘Next’ button. Scoring occur in the background while you complete the rest of the exam.
            Overview
            The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design. Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
            Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
            Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
            To start the lab
            You may start the lab by clicking the Next button.
            Another administrator attempts to establish connectivity between two virtual networks named VNET1 and VNET2.
            The administrator reports that connections across the virtual networks fail.
            You need to ensure that network connections can be established successfully between VNET1 and VNET2 as quickly as possible.
            What should you do from the Azure portal?

              Answer:

              Explanation: You can connect one VNet to another VNet using either a Virtual network peering, or an Azure VPN Gateway.
              To create a virtual network gateway
              Step1 : In the portal, on the left side, click +Create a resource and type 'virtual network gateway' in search. Locate Virtual network gateway in the search return and click the entry. On the Virtual network gateway page, click Create at the bottom of the page to open the Create virtual network gateway page.
              Step 2: On the Create virtual network gateway page, fill in the values for your virtual network gateway.
              AZ-100 dumps exhibit
              AZ-100 dumps exhibit
              Name: Name your gateway. This is not the same as naming a gateway subnet. It's the name of the gateway object you are creating.
              Gateway type: Select VPN. VPN gateways use the virtual network gateway type VPN.
              Virtual network: Choose the virtual network to which you want to add this gateway. Click Virtual network to open the 'Choose a virtual network' page. Select the VNet. If you don't see your VNet, make sure the Location field is pointing to the region in which your virtual network is located.
              Gateway subnet address range: You will only see this setting if you did not previously create a gateway subnet for your virtual network. If you previously created a valid gateway subnet, this setting will not appear.
              Step 4: Select Create New to create a Gateway subnet.
              AZ-100 dumps exhibit
              Step 5: Click Create to begin creating the VPN gateway. The settings are validated and you'll see the "Deploying Virtual network gateway" tile on the dashboard. Creating a gateway can take up to 45 minutes. You may need to refresh your portal page to see the completed status.
              References:
              https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-howto-vnet-vnet-resource-manager-portal?

              NEW QUESTION 10
              Overview
              The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
              Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
              Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
              Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
              To start the lab
              You may start the lab by clicking the Next button.
              You plan to back up all the Azure virtual machines in your Azure subscription at 02:00 Coordinated Universal Time (UTC) daily.
              You need to prepare the Azure environment to ensure that any new virtual machines can be configured quickly for backup. The solution must ensure that all the daily backups performed at 02:00 UTC are stored for only 90 days.
              What should you do from the Azure portal?

                Answer:

                Explanation: Task A: Create a Recovery Services vault (if a vault already exists skip this task, go to Task B below) A1. From Azure Portal, On the Hub menu, click All services and in the list of resources, type Recovery
                Services and click Recovery Services vaults.
                If there are recovery services vaults in the subscription, the vaults are listed. A2. On the Recovery Services vaults menu, click Add.
                A3. The Recovery Services vault blade opens, prompting you to provide a Name, Subscription, Resource group, and Location
                Task B.
                B1. On the Recovery Services vault blade (for the vault you just created), in the Getting Started section, click Backup, then on the Getting Started with Backup blade, select Backup goal.
                The Backup Goal blade opens. If the Recovery Services vault has been previously configured, then the Backup Goal blades opens when you click Backup on the Recovery Services vault blade.
                B2. From the Where is your workload running? drop-down menu, select Azure.
                B3. From the What do you want to backup? menu, select Virtual Machine, and click OK.
                AZ-100 dumps exhibit
                B4. Finish the Wizard.
                Task C. create a backup schedule
                C1. Open the Microsoft Azure Backup agent. You can find it by searching your machine for Microsoft Azure Backup.
                AZ-100 dumps exhibit
                C2. In the Backup agent's Actions pane, click Schedule Backup to launch the Schedule Backup Wizard.
                AZ-100 dumps exhibit
                C3. On the Getting started page of the Schedule Backup Wizard, click Next. C4. On the Select Items to Backup page, click Add Items.
                The Select Items dialog opens.
                C5. Select Blob Storage you want to protect, and then click OK. C6.In the Select Items to Backup page, click Next.
                On the Specify Backup Schedule page, specify Schedule a backup every: day
                At the following times: 2.00 AM
                AZ-100 dumps exhibit
                C7. On the Select Retention Policy page, set it to 90 days, and click Next.
                AZ-100 dumps exhibit
                C8. Finish the Wizard. References:
                https://docs.microsoft.com/en-us/azure/backup/backup-configure-vault

                NEW QUESTION 11
                You have an Azure subscription named Subscription1.
                You have 5 TB of data that you need to transfer to Subscription. You plan to use an Azure Import/Export job.
                What can you use as the destination of the imported data?

                • A. Azure SQL Database
                • B. Azure Data Factory
                • C. A virtual machine
                • D. Azure Blob storage

                Answer: D

                Explanation: References:
                https://docs.microsoft.com/en-us/azure/storage/common/storage-import-export-service

                NEW QUESTION 12
                You create a virtual machine scale set named Scale1. Scale1 is configured as shown in the following exhibit.
                AZ-100 dumps exhibit
                Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
                AZ-100 dumps exhibit

                  Answer:

                  Explanation: Box 1:
                  The Autoscale scale out rule increases the number of VMs by 2 if the CPU threshold is 80% or higher. The initial instance count is 4 and rises to 6 when the 2 extra instances of VMs are added.
                  Box 2:
                  The Autoscale scale in rule decreases the number of VMs by 4 if the CPU threshold is 30% or lower. The initial instance count is 4 and thus cannot be reduced to 0 as the minimum instances is set to 2. Instances are only added when the CPU threshold reaches 80%.
                  References:
                  https://docs.microsoft.com/en-us/azure/azure-monitor/platform/autoscale-overview https://docs.microsoft.com/en-us/azure/azure-monitor/platform/autoscale-best-practices https://docs.microsoft.com/en-us/azure/azure-monitor/platform/autoscale-common-scale-patterns

                  NEW QUESTION 13
                  You have 100 Azure subscriptions. All the subscriptions are associated to the same Azure Active Directory (Azure AD) tenant named contoso.com.
                  You are a global administrator.
                  You plan to create a report that lists all the resources across all the subscriptions. You need to ensure that you can view all the resources in all the subscriptions.
                  What should you do?

                  • A. From the Azure portal, modify the profile settings of your account.
                  • B. From Windows PowerShell, run the Add-AzureADAdministrativeUnitMember cmdlet.
                  • C. From Windows PowerShell, run the New-AzureADUserAppRoleAssignment cmdlet.
                  • D. From the Azure portal, modify the properties of the Azure AD tenant.

                  Answer: C

                  Explanation: The New-AzureADUserAppRoleAssignment cmdlet assigns a user to an application role in Azure Active Directory (AD). Use it for the application report.
                  References:
                  https://docs.microsoft.com/en-us/powershell/module/azuread/new-azureaduserapproleassignment?view=azuread

                  NEW QUESTION 14
                  You have an Azure subscription named Subscription1. Subscription1 contains the resources in the following table.
                  AZ-100 dumps exhibit
                  VNet1 is in RG1. VNet2 is in RG2. There is no connectivity between VNet1 and Vnet2.
                  An administrator named Admin1 creates an Azure virtual machine named VM1 in RG1. VM1 uses a disk named Disk1 and connects to VNet1. Admin1 then installs a custom application in VM1.
                  You need to move the custom application to Vnet2. The solution must minimize administrative effort. Which two actions should you perform? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
                  AZ-100 dumps exhibit

                    Answer:

                    Explanation: You can move a VM and its associated resources to another resource group using the portal. References: https://docs.microsoft.com/en-us/azure/virtual-machines/windows/move-vm

                    NEW QUESTION 15
                    You have an Azure subscription that contains a storage account.
                    You have an on-premises server named Server1 that runs Window Server 2016. Server1 has 2 TB of data. You need to transfer the data to the storage account by using the Azure Import/Export service.
                    In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.
                    NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.
                    AZ-100 dumps exhibit

                      Answer:

                      Explanation: AZ-100 dumps exhibit

                      NEW QUESTION 16
                      You have a resource group named RG1. RG1 contains an Azure Storage account named storageaccount1 and a virtual machine named VM1 that runs Windows Server 2016. Storageaccount1 contains the disk files for VM1. You apply a ReadOnly lock to RG1.
                      What can you do from the Azure portal?

                      • A. Generate an automation script for RG1.
                      • B. View the keys of storageaccount1.
                      • C. Upload a blob to storageaccount1.
                      • D. Start VM1.

                      Answer: B

                      Explanation: ReadOnly means authorized users can read a resource, but they can't delete or update the resource. Applying this lock is similar to restricting all authorized users to the permissions granted by the Reader role.
                      References: https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-lock-resources

                      NEW QUESTION 17
                      Your network contains an Active Directory domain named adatum.com and an Azure Active Directory (Azure AD) tenant named adatum.onmicrosoft.com.
                      Adatum.com contains the user accounts in the following table.
                      AZ-100 dumps exhibit
                      Adatum.onmicrosoft.com contains the user accounts in the following table.
                      AZ-100 dumps exhibit
                      You need to implement Azure AD Connect. The solution must follow the principle of least privilege.
                      Which user accounts should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
                      AZ-100 dumps exhibit

                        Answer:

                        Explanation: Box 1: User5
                        In Express settings, the installation wizard asks for the following: AD DS Enterprise Administrator credentials
                        Azure AD Global Administrator credentials
                        The AD DS Enterprise Admin account is used to configure your on-premises Active Directory. These credentials are only used during the installation and are not used after the installation has completed. The Enterprise Admin, not the Domain Admin should make sure the permissions in Active Directory can be set in all domains.
                        Box 2: UserA
                        Azure AD Global Admin credentials credentials are only used during the installation and are not used after the installation has completed. It is used to create the Azure AD Connector account used for synchronizing changes to Azure AD. The account also enables sync as a feature in Azure AD.
                        References:
                        https://docs.microsoft.com/en-us/azure/active-directory/connect/active-directory-aadconnect-accounts-permissio

                        NEW QUESTION 18
                        You have two Azure virtual machines named VM1 and VM2. You have two Recovery Services vaults named RSV1 and RSV2.
                        VM2 is protected by RSV1.
                        You need to use RSV2 to protect VM2. What should you do first?

                        • A. From the RSV1 blade, click Backup items and stop the VM2 backup.
                        • B. From the RSV1 blade, click Backup Jobs and export the VM2 backup.
                        • C. From the RSV1 blade, click Backu
                        • D. From the Backup blade, select the backup for the virtual machine, and then click Backup.
                        • E. From the VM2 blade, click Disaster recovery, click Replication settings, and then select RSV2 as the Recovery Services vault.

                        Answer: D

                        Explanation: References:
                        https://docs.microsoft.com/en-us/azure/backup/backup-azure-vms-first-look-arm

                        NEW QUESTION 19
                        You have two subscriptions named Subscription1 and Subscription2. Each subscription is associated to a different Azure AD tenant.
                        Subscription1 contains a virtual network named VNet1.VNet1 contains an Azure virtual machine named VM1 and has an IP address space of 10.0.0.0/16.
                        Subscription2 contains a virtual network named VNet2. VNet2 contains an Azure virtual machine named VM2 and has an IP address space of 10.10.0.0/24.
                        You need to connect VNet1 to VNet2. What should you do first?

                        • A. Move VNet1 to Subscription2.
                        • B. Modify the IP address space of VNet2.
                        • C. Provision virtual network gateways.
                        • D. Move VM1 to Subscription2.

                        Answer: C

                        Explanation: The virtual networks can be in the same or different regions, and from the same or different subscriptions. When connecting VNets from different subscriptions, the subscriptions do not need to be associated with the same Active Directory tenant.
                        Configuring a VNet-to-VNet connection is a good way to easily connect VNets. Connecting a virtual network to another virtual network using the VNet-to-VNet connection type (VNet2VNet) is similar to creating a
                        Site-to-Site IPsec connection to an on-premises location. Both connectivity types use a VPN gateway to provide a secure tunnel using IPsec/IKE, and both function the same way when communicating.
                        The local network gateway for each VNet treats the other VNet as a local site. This lets you specify additional address space for the local network gateway in order to route traffic.
                        References:
                        https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-howto-vnet-vnet-resource-manager-portal

                        Recommend!! Get the Full AZ-100 dumps in VCE and PDF From prep-labs.com, Welcome to Download: https://www.prep-labs.com/dumps/AZ-100/ (New 106 Q&As Version)