AZ-103 | Simulation AZ-103 Bible 2020

we provide Pinpoint Microsoft AZ-103 download which are the best for clearing AZ-103 test, and to get certified by Microsoft Microsoft Azure Administrator. The AZ-103 Questions & Answers covers all the knowledge points of the real AZ-103 exam. Crack your Microsoft AZ-103 Exam with latest dumps, guaranteed!

Online AZ-103 free questions and answers of New Version:

NEW QUESTION 1
DRAG DROP
You have an Azure subscription that contains two virtual networks named VNet1 and VNet2. Virtual machines connect to the virtual networks.
The virtual networks have the address spaces and the subnets configured as shown in the following table.
AZ-103 dumps exhibit
You need to add the address space of 10.33.0.0/16 to VNet1. The solution must ensure that the hosts on VNet1 and VNet2 can communicate.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
AZ-103 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Step 1: Remove peering between Vnet1 and VNet2.
You can't add address ranges to, or delete address ranges from a virtual network's address space once a virtual network is peered with another virtual network. To add or remove address ranges, delete the peering, add or remove the address ranges, then re-create the peering.
Step 2: Add the 10.44.0.0/16 address space to VNet1. Step 3: Recreate peering between VNet1 and VNet2 References:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-manage-peering

NEW QUESTION 2
DRAG DROP
You have an Azure subscription that contains an Azure Service Bus named Bus1.
Your company plans to deploy two Azure web apps named App1 and App2. The web apps will create messages that have the following requirements:
 Each message created by App1 must be consumed by only a single consumer
 Each message created by App2 will be consumed by multiple consumers.
Which resource should you create for each web app? To answer, drag the appropriate resources to the correct web apps. Each resource may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
AZ-103 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
AZ-103 dumps exhibit

NEW QUESTION 3
You have two Azure virtual networks named VNet1 and VNet2. VNet1 contains an Azure virtual machine named VM1. VNet2 contains an Azure virtual machine named VM2.
VM1 hosts a frontend application that connects to VM2 to retrieve dat a.
Users report that the frontend application is slower than usual.
You need to view the average round-trip time (RTT) of the packets from VM1 to VM2. Which Azure Network Watcher feature should you use?

  • A. NSG flow logs
  • B. Connection troubleshoot
  • C. IP flow verify
  • D. Connection monitor

Answer: D

Explanation:
The Connection Monitor feature in Azure Network Watcher is now generally available in all public regions. Connection Monitor provides you RTT values on a per-minute granularity. You can monitor a direct TCP connection from a virtual machine to a virtual machine, FQDN, URI, or IPv4 address. References:
https://azure.microsoft.com/en-us/updates/general-availability-azure-network-watcher-connection- monitor-in-all-public-regions/

NEW QUESTION 4
HOTSPOT
You have an Azure subscription named Subscription1. Subscription1 contains a virtual machine named VM1.
You install and configure a web server and a DNS server on VM1.
VM1 has the effective network security rules shown in the following exhibit.
AZ-103 dumps exhibit
Use the drop-down menus to select the answer choice that completes each statement based on the
information presented in the graphic.
NOTE: Each correct selection is worth one point.
AZ-103 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
AZ-103 dumps exhibit

NEW QUESTION 5
HOTSPOT
You have an Azure virtual machine named VM1 that connects to a virtual network named VNet1. VM1 has the following configurations:
 Subnet: 10.0.0.0/24
 Availability set: AVSet
 Network security group (NSG): None
 Private IP address: 10.0.0.4 (dynamic)
 Public IP address: 40.90.219.6 (dynamic)
You deploy a standard, Internet-facing load balancer named slb1. You need to configure slb1 to allow connectivity to VM1.
Which changes should you apply to VM1 as you configure slb1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
AZ-103 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
AZ-103 dumps exhibit

NEW QUESTION 6
HOTSPOT
You have an Azure subscription named Subscrption1 that is associated to an Azure Active Directory (Azure AD) tenant named AAD1.
Subscription1 contains the objects in the following table:
AZ-103 dumps exhibit
You plan to create a single backup policy for Vault1. To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
AZ-103 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: RG1 only Box 2: 99 years
With the latest update to Azure Backup, customers can retain their data for up to 99 years in Azure. Note: A backup policy defines a matrix of when the data snapshots are taken, and how long those snapshots are retained.
The backup policy interface looks like this:
AZ-103 dumps exhibit
References: https://docs.microsoft.com/en-us/azure/backup/backup-azure-vms-first-look-arm#defining-a-backup-policy
https://blogs.microsoft.com/firehose/2015/02/16/february-update-to-azure-backup-includes-data-retention-up-to-99-years-offline-backup-and-more/

NEW QUESTION 7
HOTSPOT
You have an Azure subscription1 that contains the resource shown in the following table.
AZ-103 dumps exhibit
The status of VM1 is Running.
You assign an Azure policy as shown in the exhibit. (Click the Exhibit tab.) You assign the policy by using the following parameters.
AZ-103 dumps exhibit
For each of the following statements, select YES if the statements is true. Otherwise, select No. Note: Each correct selection is worth one point.
AZ-103 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
AZ-103 dumps exhibit

NEW QUESTION 8
You have an Azure DNS zone named adatum.com. You need to delegate a subdomain named research.adatum.com to a different DNS server in Azure. What should you do?

  • A. Create an PTR record named research in the adatum.com zone.
  • B. Create an NS record named research in the adatum.com zone.
  • C. Modify the SOA record of adatum.com.
  • D. Create an A record named “.research in the adatum.com zone.

Answer: D

Explanation:
Configure A records for the domains and sub domains.
References: http://www.stefanjohansson.org/2012/12/how-to-configure-custom-dns-names-for- multiple-subdomain-based-azure-web-sites/

NEW QUESTION 9
DRAG DROP
You need to configure the Azure ExpressRoute circuits.
How should you configure Azure ExpressRoute routing? To answer, drag the appropriate configurations to the correct locations. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
AZ-103 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
AZ-103 dumps exhibit

NEW QUESTION 10
DRAG DROP
You have an Azure subscription that contains an Azure virtual machine named VM1. VM1 runs Windows Server 2016 and is part of an availability set.
VM1 has virtual machine-level backup enabled. VM1 is deleted.
You need to restore VM1 from the backup. VM1 must be part of the availability set.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
AZ-103 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
AZ-103 dumps exhibit

NEW QUESTION 11
You have an Azure subscription that contains the resources in the following table.
AZ-103 dumps exhibit
Subnet1 is associated to VNet1. NIC1 attaches VM1 to Subnet1. You need to apply ASG1 to VM1.
What should you do?

  • A. Modify the properties of NSG1.
  • B. Modify the properties of ASG1.
  • C. Associate NIC1 to ASG1.

Answer: B

Explanation:
When you deploy VMs, make them members of the appropriate ASGs. You associate the ASG with a subnet.
References: https://azure.microsoft.com/en-us/blog/applicationsecuritygroups/

NEW QUESTION 12
You plan to support many connections to your company's automatically uses up to five instances when CPU utilization on the instances exceeds 70 percent for 10 minutes. When CPU utilization decreases, the solution must automatically reduce the number of instances.
What should you do from the Azure portal?

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Step 1:
Locate the Homepage App Service plan Step 2:
Click Add a rule, and enter the appropriate fields, such as below, and the click Add. Time aggregation: average
Metric Name: Percentage CPU Operator: Greater than Threshold 70
Duration: 10 minutes Operation: Increase count by Instance count: 4
AZ-103 dumps exhibit
Step 3:
We must add a scale in rule as well. Click Add a rule, and enter the appropriate fields, such as below, then click Add.
Operator: Less than Threshold 70
Duration: 10 minutes Operation: Decrease count by Instance count: 4
References:
https://docs.microsoft.com/en-us/azure/virtual-machine-scale-sets/virtual-machine-scale-sets- autoscale-portal
https://docs.microsoft.com/en-us/azure/monitoring-and-diagnostics/insights-autoscale-best-practices

NEW QUESTION 13
You have an Azure tenant that contains two subscriptions named Subscription1 and Subscription2.
In Subscription1, you deploy a virtual machine named Server1 that runs Windows Server 2016. Server1 uses managed disks.
You need to move Server1 to Subscription2. The solution must minimize administration effort. What should you do first?

  • A. In Subscription2, create a copy of the virtual disk.
  • B. From Azure PowerShell, run the Move-AzureRmResource cmdlet.
  • C. Create a snapshot of the virtual disk.
  • D. Create a new virtual machine in Subscription2.

Answer: B

Explanation:
To move existing resources to another resource group or subscription, use the Move-AzureRmResource cmdlet. References:
https://docs.microsoft.com/en-in/azure/azure-resource-manager/resource-group-move- resources#moveresources

NEW QUESTION 14
Your company registers a domain name of contoso.com.
You create an Azure DNS named contoso.com and then you add an A record to the zone for a host named www that has an IP address of 131.107.1.10.
You discover that Internet hosts are unable to resolve www.contoso.com to the 131.107.1.10 IP address.
You need to resolve the name resolution issue.
Solution: You modify the name server at the domain registrar. Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

Explanation:
Modify the Name Server (NS) record.
References: https://docs.microsoft.com/en-us/azure/dns/dns-delegate-domain-azure-dns

NEW QUESTION 15
You have an Azure subscription.
You have an on-premises virtual machine named VM1. The settings for VM1 are shown in the exhibit. (Click the Exhibit button.)
AZ-103 dumps exhibit
You need to ensure that you can use the disks attached to VM1 as a template for Azure virtual machines.
What should you modify on VM1?

  • A. Integration Services
  • B. the network adapters
  • C. the memory
  • D. the hard drive
  • E. the processor

Answer: D

Explanation:
From the exhibit we see that the disk is in the VHDX format.
Before you upload a Windows virtual machines (VM) from on-premises to Microsoft Azure, you must prepare the virtual hard disk (VHD or VHDX). Azure supports only generation 1 VMs that are in the VHD file format and have a fixed sized disk. The maximum size allowed for the VHD is 1,023 GB. You can convert a generation 1 VM from the VHDX file system to VHD and from a dynamically expanding
disk to fixed-sized. References:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/prepare-for-upload-vhd- image?toc=%2fazure%2fvirtual-machines%2fwindows%2ftoc.json

NEW QUESTION 16
You have two subscriptions named Subscription1 and Subscription2. Each subscription is associated to a different Azure AD tenant.
Subscription1 contains a virtual network named VNet1.VNet1 contains an Azure virtual machine named VM1 and has an IP address space of 10.0.0.0/16.
Subscription2 contains a virtual network named VNet2. VNet2 contains an Azure virtual machine named VM2 and has an IP address space of 10.10.0.0/24.
You need to connect VNet1 to VNet2. What should you do first?

  • A. Move VNet1 to Subscription2.
  • B. Modify the IP address space of VNet2.
  • C. Provision virtual network gateways.
  • D. Move VM1 to Subscription2.

Answer: C

Explanation:
The virtual networks can be in the same or different regions, and from the same or different subscriptions. When connecting VNets from different subscriptions, the subscriptions do not need to be associated with the same Active Directory tenant.
Configuring a VNet-to-VNet connection is a good way to easily connect VNets. Connecting a virtual network to another virtual network using the VNet-to-VNet connection type (VNet2VNet) is similar to
creating a Site-to-Site IPsec connection to an on-premises location. Both connectivity types use a VPN gateway to provide a secure tunnel using IPsec/IKE, and both function the same way when communicating.
The local network gateway for each VNet treats the other VNet as a local site. This lets you specify additional address space for the local network gateway in order to route traffic.
References: https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-howto-vnet-vnet- resource-manager-portal

NEW QUESTION 17
HOTSPOT
You have an Azure subscription named Subscription1. Subscription1 contains two Azure virtual machines named VM1 and VM2. VM1 and VM2 run Windows Server 2016.
VM1 is backed up daily by Azure Backup without using the Azure Backup agent.
VM1 is affected by ransomware that encrypts dat a.
You need to restore the latest backup of VM1.
To which location can you restore the backup? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
AZ-103 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: VM1 only
To restore files or folders from the recovery point, go to the virtual machine and choose the desired recovery point.
Box 2: A new Azure virtual machine only
On the Restore configuration blade, you have two choices:
 Create virtual machine
 Restore disks References:
https://docs.microsoft.com/en-us/azure/backup/backup-azure-restore-files-from-vm
https://docs.microsoft.com/en-us/azure/backup/backup-azure-arm-restore-vms

NEW QUESTION 18
HOTSPOT
You have an Azure Storage accounts as shown in the following exhibit.
AZ-103 dumps exhibit
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
AZ-103 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: storageaccount1 and storageaccount2 only Box 2: All the storage accounts
Note: The three different storage account options are: General-purpose v2 (GPv2) accounts, General-purpose v1 (GPv1) accounts, and Blob storage accounts.
 General-purpose v2 (GPv2) accounts are storage accounts that support all of the latest features for blobs, files, queues, and tables.
 Blob storage accounts support all the same block blob features as GPv2, but are limited to supporting only block blobs.
 General-purpose v1 (GPv1) accounts provide access to all Azure Storage services, but may not have the latest features or the lowest per gigabyte pricing.
References: https://docs.microsoft.com/en-us/azure/storage/common/storage-account-options

NEW QUESTION 19
You have five Azure virtual machines that run Windows Server 2016.
You have an Azure load balancer named LB1 that provides load balancing se
You need to ensure that visitors are serviced by the same web server for each
request.
What should you configure?

  • A. Floating IP (direct server return) to Disable
  • B. Session persistence to Client IP
  • C. a health probe
  • D. Session persistence to None

Answer: B

Explanation:
You can set the sticky session in load balancer rules with setting the session persistence as the client IP.
References:
https://cloudopszone.com/configure-azure-load-balancer-for-sticky-sessions/

NEW QUESTION 20
HOTSPOT
You have an Azure subscription named Subscription1.
You enable Azure Active Directory (AD) Privileged Identity Management.
From Azure AD Privileged Identity Management, you configure the Global Administrator role for the Azure Active Directory (Azure AD) tenant as shown in the Role settings exhibit. (Click the Exhibit tab.)
AZ-103 dumps exhibit
From Azure AD Privileged Identity Management, you configure the global administrators as shown in
the Members exhibit. (Click the Exhibit tab.)
AZ-103 dumps exhibit
User2 activates the Global Administrator role on July 16, 2018, at 10:00, as shown in the Activation exhibit. (Click the Exhibit tab.)
AZ-103 dumps exhibit
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
AZ-103 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
AZ-103 dumps exhibit

NEW QUESTION 21
You have an Azure App Service plan that hosts an Azure App Service named App1. You configure one production slot and four staging slots for App1.
You need to allocate 10 percent of the traffic to each staging slot and 60 percent of the traffic to the production slot.
What should you add to Appl1?

  • A. slots to the Testing in production blade
  • B. a performance test
  • C. a WebJob
  • D. templates to the Automation script blade

Answer: A

Explanation:
Besides swapping, deployment slots offer another killer feature: testing in production. Just like the name suggests, using this, you can actually test in production. This means that you can route a specific percentage of user traffic to one or more of your deployment slots.
Example:
AZ-103 dumps exhibit
References:
https://stackify.com/azure-deployment-slots/

NEW QUESTION 22
You need to prepare the environment to meet the authentication requirements.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

  • A. Allow inbound TCP port 8080 to the domain controllers in the Miami office.
  • B. Add http://autogon.microsoftazuread-sso.com to the intranet zone of each client computer in the Miamioffice.
  • C. Join the client computers in the Miami office to Azure AD.
  • D. Install the Active Directory Federation Services (AD FS) role on a domain controller in the Miami office.
  • E. Install Azure AD Connect on a server in the Miami office and enable Pass-through Authentication.

Answer: BE

Explanation:
B: You can gradually roll out Seamless SSO to your users. You start by adding the following Azure AD URL to all or selected users' Intranet zone settings by using Group Policy in Active Directory: https://autologon.microsoftazuread-sso.com
E: Seamless SSO works with any method of cloud authentication - Password Hash Synchronization or Pass-through Authentication, and can be enabled via Azure AD Connect.
References:
https://docs.microsoft.com/en-us/azure/active-directory/hybrid/how-to-connect-sso-quick-start

NEW QUESTION 23
Which blade should you instruct the finance department auditors to use?

  • A. invoices
  • B. partner information
  • C. cost analysis
  • D. External services

Answer: A

NEW QUESTION 24
You need to deploy an Azure load balancer named Ib 1015 to your Azure subscription. The solution must meet the following requirements:
-Support the load balancing of IP traffic from the Internet to Azure virtual machines connected to VNET1016 \subnet0.
-Prov.de 4 Service level Agreement (SWJ of 99.99 percent ability for the Azure virtual machines.
-Minimize Azure-related costs.
What should you do from the Azure portal?
To complete this task, you do NOT need to wait for the deployment to complete. Once the deployment start in Azure, you can move to the next task.

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Step 1:
On the top left-hand side of the screen, click Create a resource > Networking > Load Balancer. Step 2:
In the Create a load balancer page enter these values for the load balancer: myLoadBalancer - for the name of the load balancer.
Internal - for the type of the load balancer. Basic - for SKU version.
Microsoft guarantees that apps running in a customer subscription will be available 99.99% of the time.
VNET1016\subnet0 - for subnet that you choose from the list of existing subnets.
Step 3: Accept the default values for the other settings and click Create to create the load balancer.

NEW QUESTION 25
HOTSPOT
You have an Azure web app named App1 that has two deployment slots named Production and Staging. Each slot has the unique settings shown in the following table.
AZ-103 dumps exhibit
You perform a slot swap.
What are the configurations of the Production slot after the swap? To answer, select the appropriate options in the answer area.
NOTE: Each correction is worth one point.
AZ-103 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Swapping the slots means the destination slot website URL will run source slot code with destination slot settings.

NEW QUESTION 26
Click to expand each objective. To connect to the Azure portal, type https://portal.azure.com in the browser address bar.
AZ-103 dumps exhibit
AZ-103 dumps exhibit
AZ-103 dumps exhibit
AZ-103 dumps exhibit
AZ-103 dumps exhibit
AZ-103 dumps exhibit
When you are finished performing all the tasks, click the ‘Next’ button.
Note that you cannot return to the lab once you click the ‘Next’ button. Scoring occur in the background while you complete the rest of the exam.
Overview
The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design. Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
To start the lab
You may start the lab by clicking the Next button.
You need to deploy two Azure virtual machines named VM1003a and VM1003b based on the Ubuntu Server 17.10 image. The deployment must meet the following requirements:
 Provide a Service Level Agreement (SLA) of 99.95 percent availability.
 Use managed disks.
What should you do from the Azure portal?

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
1. Open the Azure portal.
2. On the left menu, select All resources. You can sort the resources by Type to easily find your images.
3. Select the image you want to use from the list. The image Overview page opens.
4. Select Create VM from the menu.
5. Enter the virtual machine information.
Select VM1003a as the name for the first Virtual machine. The user name and password entered here will be used to log in to the virtual machine. When complete, select OK. You can create the new VM in an existing resource group, or choose Create new to create a new resource group to store the VM.
6. Select a size for the VM. To see more sizes, select View all or change the Supported disk type filter.
7. Under Settings, make changes as necessary and select OK.
8. On the summary page, you should see your image name listed as a Private image. Select Ok to start the virtual machine deployment.
Repeat the procedure for the second VM and name it VM1003b.
References: https://docs.microsoft.com/en-us/azure/virtual-machines/windows/create-vm-generalized-managed

NEW QUESTION 27
You need to implement a backup solution for App1 after the application is moved. What should you create first?

  • A. a recovery plan
  • B. an Azure Backup Server
  • C. a backup policy
  • D. a Recovery Services vault

Answer: D

Explanation:
A Recovery Services vault is a logical container that stores the backup data for each protected resource, such as Azure VMs. When the backup job for a protected resource runs, it creates a recovery point inside the Recovery Services vault.
Scenario:
There are three application tiers, each with five virtual machines. Move all the virtual machines for App1 to Azure.
Ensure that all the virtual machines for App1 are protected by backups.
References: https://docs.microsoft.com/en-us/azure/backup/quick-backup-vm-portal

NEW QUESTION 28
HOTSPOT
You have an Azure subscription named Subscription1.
In Subscription1, you create an Azure web app named WebApp1. WebApp1 will access an external service that requires certificate authentication.
You plan to require the use of HTTPS to access WebApp1. You need to upload certificates to WebApp1.
In which formats should you upload the certificate? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
AZ-103 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
A PFX file contains the public key file (SSL Certificate) and its unique private key file. This is required for HTTPS access. The web app will distribute the public key (in a CER file) to clients that connect to the web app.
The CER file is an SSL Certificate which has the public key of the external service. The external service will have the private key associated with the public key contained in the CER file.

NEW QUESTION 29
......

Recommend!! Get the Full AZ-103 dumps in VCE and PDF From Certleader, Welcome to Download: https://www.certleader.com/AZ-103-dumps.html (New 303 Q&As Version)