AZ-303 | Top Tips Of Down To Date AZ-303 Free Draindumps

It is more faster and easier to pass the Microsoft AZ-303 exam by using Tested Microsoft Microsoft Azure Architect Technologies (beta) questuins and answers. Immediate access to the Abreast of the times AZ-303 Exam and find the same core area AZ-303 questions with professionally verified answers, then PASS your exam with a high score now.

Also have AZ-303 free dumps questions for you:

NEW QUESTION 1

You create a new Azure subscription. You create a resource group named RG1. In RG1. you create the resources shown in the following table.
AZ-303 dumps exhibit
You need to configure an encrypted tunnel between your on-premises network and VNET1.
Which two additional resources should you create in Azure? Each correct answer presents part of the solution.

  • A. a point-to-site configuration
  • B. a local network gateway
  • C. a VNet-to-VNet connection
  • D. a VPN gateway
  • E. a site-to-site connection

Answer: DE

Explanation:
A Site-to-Site VPN gateway connection is used to connect your on-premises network to an Azure virtual network over an IPsec/IKE (IKEv1 or IKEv2) VPN tunnel. This type of connection requires a VPN device, a local network gateway, located on-premises that has an externally facing public IP address assigned to it.
Finally, create a Site-to-Site VPN connection between your virtual network gateway and your on-premises VPN device.
References:
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-howto-site-to-site-resource-manager-portal

NEW QUESTION 2

You have Azure virtual machines deployed to three Azure regions. Each region contains a single virtual network that has four virtual machines on the same subnet. Each virtual machine runs an application named App1. App1 is accessible by using HTTPS. Currently, the virtual machines are inaccessible from the internet.
You need to use Azure Front Door to load balance requests for App1 across all the virtual machines. Which additional Azure service should you provision?

  • A. a public Azure Load Balancer
  • B. Azure Traffic Manager
  • C. an internal Azure Load Balancer
  • D. Azure Private Link

Answer: A

NEW QUESTION 3

You have an Azure subscription that contains 10 virtual machines on a virtual network.
You need to create a graph visualization to display the traffic flow between the virtual machines. What should you do from Azure Monitor?

  • A. From Activity log, use quick insights.
  • B. From Metrics, create a chart.
  • C. From Logs, create a new query.
  • D. From Workbooks, create a workbook.

Answer: C

Explanation:
Navigate to Azure Monitor and select Logs to begin querying the data Reference:
https://azure.microsoft.com/en-us/blog/analysis-of-network-connection-data-with-azure-monitor-for-virtual-mac

NEW QUESTION 4

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company is deploying an on-premises application named Appl. Users will access App1 by using a URL of https://app1.contoso.com. You register App1 in Azure Active Directory (Azure AD) and publish Appl by using the Azure AD Application Proxy. You need to ensure that Appl appears in the My Apps portal for all the users.
Solution: You create a conditional access policy for App1.

  • A. Yes
  • B. No

Answer: B

NEW QUESTION 5

A company hosts virtual machines (VMs) in an on-premises datacenter and in Azure. The on-premises and Azure-based VMs communicate using ExpressRoute.
The company wants to be able to continue regular operations if the ExpressRoute connection fails. Failover connections must use the Internet and must not require Multiprotocol Label Switching (MPLS) support.
You need to recommend a solution that provides continued operations. What should you recommend?

  • A. Set up a second ExpressRoute connection.
  • B. Increase the bandwidth of the existing ExpressRoute connection.
  • C. Increase the bandwidth for the on-premises internet connection.
  • D. Set up a VPN connection.

Answer: D

Explanation:

References:
https://docs.microsoft.com/en-us/azure/architecture/reference-architectures/hybrid-networking/expressroutevpn-

NEW QUESTION 6

You are developing an Azure Web App. You configure TLS mutual authentication for the web app.
You need to validate the client certificate in the web app. To answer, select the appropriate options in the answer area.
AZ-303 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
AZ-303 dumps exhibit

NEW QUESTION 7

You plan to create an Azure Storage account in the Azure region of East US 2. You need to create a storage account that meets the following requirements:
AZ-303 dumps exhibit Replicates synchronously
AZ-303 dumps exhibit Remains available if a single data center in the region fails
How should you configure the storage account? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
AZ-303 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: Zone-redundant storage (ZRS)
Zone-redundant storage (ZRS) replicates your data synchronously across three storage clusters in a single region.
LRS would not remain available if a data center in the region fails GRS and RA GRS use asynchronous replication.
Box 2: StorageV2 (general purpose V2) ZRS only support GPv2.
References:
https://docs.microsoft.com/en-us/azure/storage/common/storage-redundancy https://docs.microsoft.com/en-us/azure/storage/common/storage-redundancy-zrs

NEW QUESTION 8

Your network contains an on-premises Active Directory domain named contoso.com. The domain contains the users shown in the following table.
AZ-303 dumps exhibit
You plan to install Azure AD Connect and enable SSO.
You need to specify which user to use to enable SSO. The solution must use the principle of least privilege. Which user should you specify?

  • A. User4
  • B. User1
  • C. User3
  • D. User2

Answer: C

NEW QUESTION 9

You have an Azure subscription named Subscription1 that contains an Azure virtual network named VNet1. VNet1 connects to your on-premises network by using Azure ExpressRoute.
You need to connect VNet1 to the on-premises network by using a site-to-site VPN. The solution must minimize cost.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

  • A. Create a VPN gateway that uses the VpnGw1 SKU.
  • B. Create a connection.
  • C. Create a local site VPN gateway.
  • D. Create a gateway subnet.
  • E. Create a VPN gateway that uses the Basic SKU.

Answer: ABC

Explanation:
References:
https://docs.microsoft.com/en-za/archive/blogs/canitpro/step-by-step-configuring-a-site-to-site-vpn-gateway-bet

NEW QUESTION 10

Your network contains an on-premises Active Directory domain named contoso.com that contains a user named User1. The domain syncs to Azure Active Directory (Azure AD). You have the Windows 10 devices shown in the following table.
AZ-303 dumps exhibit
The User Sign-In settings are configured as shown in the following exhibit.
AZ-303 dumps exhibit
AZ-303 dumps exhibit
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point
AZ-303 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
AZ-303 dumps exhibit

NEW QUESTION 11

You need to implement a backup solution for App1 after the application is moved. What should you create first?

  • A. a recovery plan
  • B. an Azure Backup Server
  • C. a backup policy
  • D. a Recovery Services vault

Answer: D

Explanation:
A Recovery Services vault is a logical container that stores the backup data for each protected resource, such as Azure VMs. When the backup job for a protected resource runs, it creates a recovery point inside the Recovery Services vault.
Scenario:
There are three application tiers, each with five virtual machines. Move all the virtual machines for App1 to Azure.
Ensure that all the virtual machines for App1 are protected by backups.
References: https://docs.microsoft.com/en-us/azure/backup/quick-backup-vm-portal

NEW QUESTION 12

You have an Azure subscription that contains the resource groups shown in the following table.
AZ-303 dumps exhibit
RG1 contains the virtual machines shown in the following table.
AZ-303 dumps exhibit
RG2 contains the virtual machines shown in the following table.
AZ-303 dumps exhibit
All the virtual machines are configured to use premium disks and are accessible from the Internet.
VM1 and VM2 are in an available set named AVSET1. VM3 and VM4 are in the same availability zone and are in an availability set named AVSET2. VM5 and VM6 are in different availability zones.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
AZ-303 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: Yes
VM1 and VM2 are in an available set named AVSET1.
For all Virtual Machines that have two or more instances deployed in the same Availability Set, we [Microsoft] guarantee you will have Virtual Machine Connectivity to at least one instance at least 99.95% of the time.
Box 2: No
VM3 and VM4 are in the same availability zone and are in an availability set named AVSET2. Box 3: Yes
VM5 and VM6 are in different availability zones.
For all Virtual Machines that have two or more instances deployed across two or more Availability Zones in the same Azure region, we [Microsoft] guarantee you will have Virtual Machine Connectivity to at least one instance at least 99.99% of the time.
References:
https://azure.microsoft.com/en-us/support/legal/sla/virtual-machines/v1_8/

NEW QUESTION 13

Note: This question is part of series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure Active Directory (Azure AD) tenant that contains a group named Group1. You need to enable multi-factor authentication (MFA) for the users in Group1 only.
Solution: From Multi-Factor Authentication, you select Bulk update, and you provide a CSV file that contains the members of Group1.
Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

Explanation:
We should use a Conditional Access policy.
Note: There are two ways to secure user sign-in events by requiring multi-factor authentication in Azure AD. The first, and preferred, option is to set up a Conditional Access policy that requires multi-factor authentication under certain conditions. The second option is to enable each user for Azure Multi-Factor Authentication. When users are enabled individually, they perform multi-factor authentication each time they sign in (with some exceptions, such as when they sign in from trusted IP addresses or when the remembered devices feature is turned on).
Enabling Azure Multi-Factor Authentication using Conditional Access policies is the recommended approach. Changing user states is no longer recommended unless your licenses don't include Conditional Access as it requires users to perform MFA every time they sign in.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/authentication/howto-mfa-userstates

NEW QUESTION 14

Your company plans to develop an application that will use a NoSQL database. The database will be used to store transactions and customer information by using JSON documents. Which two Azure Cosmos DB APIs can developers use for the application? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

  • A. Cassandra
  • B. Gremlin (graph)
  • C. MongoDB
  • D. Azure Table
  • E. Core (SQL)

Answer: DE

NEW QUESTION 15

Note: This question is part of series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2019. Server1 is a container host. You are creating a Dockerfile to build a container image.
You need to add a file named File1.txt from Server1 to a folder named C:\Folder1 in the container image. Solution: You add the following line to the Dockerfile.
ADD File1.txt C:/Folder1/
You then build the container image. Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

Explanation:
Copy is the correct command to copy a file to the container image. The ADD command can also be used. However, the root directory is specified as '/' and not as 'C:/'.
Reference:
https://docs.docker.com/develop/develop-images/dockerfile_best-practices/#add-or-copy https://docs.docker.com/engine/reference/builder/

NEW QUESTION 16
......

100% Valid and Newest Version AZ-303 Questions & Answers shared by Surepassexam, Get Full Dumps HERE: https://www.surepassexam.com/AZ-303-exam-dumps.html (New 0 Q&As)