MB-330 | The Renewal Guide To MB-330 Preparation

Your success in Microsoft MB-330 is our sole target and we develop all our MB-330 braindumps in a way that facilitates the attainment of this target. Not only is our MB-330 study material the best you can find, it is also the most detailed and the most updated. MB-330 Practice Exams for Microsoft MB-330 are written to the highest standards of technical accuracy.

Check MB-330 free dumps before getting the full version:

NEW QUESTION 1

You need to configure the system to meet the item testing requirements.
How should you configure the system? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
MB-330 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/inventory/enable-quality-management

NEW QUESTION 2

An employee at a company needs to lay out the various component builds for bicycles. You need to identify which constraints the employee should use to set up the bicycles.
Which two types of constraints achieve the goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

  • A. table constraints that are used generically among product configuration models
  • B. expression constraints that are used generically among product configuration models
  • C. expression constraints that are unique to each product configuration model
  • D. table constraints that are always unique to each product configuration model

Answer: AC

NEW QUESTION 3

A company hires four sales representatives for a region named Midwest.
You must configure commissions for the sales representatives in the Midwest region. The calculations must meet the following requirements:
Calculate commissions for all items sold for customers at a rate of 10 percent of total revenue on a sales order. Apply commissions for all customers in the Midwest Customer group for commission.
Split commissions equally between the representatives.
You need to configure a commission calculation that meets these requirements.
How should you configure the calculation? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
MB-330 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
MB-330 dumps exhibit

NEW QUESTION 4

You are the logistics manager at a distribution company. Your primary carrier service provides rates for transportation between New York City and Colorado. These rates are a flat rate depending on the city or general area of pickup as follows:
MB-330 dumps exhibit New York City = $500
MB-330 dumps exhibit Colorado = $450
You need to set up Transportation Management to calculate the rate from New York City to Colorado. What should you do?

  • A. Use a Point-to-Point engine based on weight and mile
  • B. Assign rates from New York City as the starting location and Colorado as the ending location and break the rates out based on the weight of the package.
  • C. Set up zones in the Zone Master for New York City and Colorad
  • D. Assign rates to each zone in the Zone Master by starting and ending location.
  • E. Create hubs for both location
  • F. Add a route plan from New York City to Colorado and assign the two charges as spot rates.
  • G. Set up a Transit Time Engine to track days from New York City to Colorad
  • H. Set up rates in the Rate Master tied to day breaks.

Answer: C

NEW QUESTION 5

You are the logistics manager at a distribution company.
Your primary carrier service provides rates for transportation between New York City and Colorado. These rates are a flat rate depending on the city or general area of pickup as follows:
MB-330 dumps exhibit New York City = $500
MB-330 dumps exhibit Colorado = $450
You need to set up Transportation Management to calculate the rate from New York City to Colorado. What should you do?

  • A. Using the Point-to-Point engine with an empty break master, assign rates based on starting and ending locations.
  • B. Create a Shipping carrier and servic
  • C. Create carrier accessorial charges to represent the rates for each location.
  • D. Use a mileage-based rate engine to configure a rate master that calculates the rate based on the miles from New York City to Colorado.
  • E. Set up a Transit Time Engine to track days from New York City to Colorad
  • F. Set up rates in the Rate Master tied to day breaks.

Answer: A

NEW QUESTION 6

HOTSPOT
A parent company owns two subsidiaries.
Some of the products manufactured in one of the subsidiaries must be sold to the other subsidiary so they can be sold in retail stores.
You need to configure the customer and products for intercompany setup.
How should you configure the setup? To answer, select the appropriate options in the answer areas.
NOTE: Each selection is worth one point.
MB-330 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
MB-330 dumps exhibit

NEW QUESTION 7

HOTSPOT
A company uses outside carrier services for inbound and outbound deliveries. Carrier services must be scheduled so that all trucks do not show up at the same time. You need to configure the c module to schedule the loads.
How should you set up dock appointments? To answer, select the appropriate options i the answer area.
NOTE: Each correct selection is worth one point.
MB-330 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/plan-appointments-for-a-load

NEW QUESTION 8

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company has an agreement to pay royalties to a third party for use of their logo.
A royalty contract must be setup so that the third party paid monthly. The payment is based on invoiced sales. You need to create a royalty contract and create monthly Accounts payable to the third party.
Solution: Create a royalty contract. Select monthly for the cumulative sales. Add line item, products, and value to pay the vendor for use of the logo.
Doss the solution meet the goal?

  • A. Yes
  • B. No

Answer: A

Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamics365/finance/accounts-payable/royalty-contract

NEW QUESTION 9

A company wants to expand their purchasing power by enhancing their current procurement catalog in Dynamics 365 for Finance and Operations.
The company wants to redirect to external websites to help build their purchase requisitions. You need to set up an external catalog.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
MB-330 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
MB-330 dumps exhibit

NEW QUESTION 10

A company plans to implement Dynamics 365 for Finance and Operations mobile device connectivity. You need to perform a spot cycle count on the mobile device.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
MB-330 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/warehousing/cycle-counting#per

NEW QUESTION 11

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company is implementing inventory management in Dynamics 365 for Finance and Operations.
The company needs to block inventory and ensure that physical inventory will not be reserved by other outbound transactions.
You need to select the appropriate option to block the inventory in the system. Solution: Select the full blocking option in the item sampling page.
Does the solution meet the goal?

  • A. Yes
  • B. No

Answer: B

NEW QUESTION 12

You are implementing containerization functionality.
You must automate containerization so that containers and picking work for shipments are created when a wave is processed. The work lines will be split into quantities to fit required containers by size.
You need to set up a container build template that defines the containerization process.
Which three items should you set up before you create the container build template? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

  • A. a wave template that includes the containerize method
  • B. container packing policies
  • C. a container group
  • D. container types
  • E. container packing strategies

Answer: ACD

NEW QUESTION 13

A company is implementing sales order functionality in Dynamics 365 for Finance and Operations. The company has a business requirement to fulfill sales orders by using direct delivery.
You need to enter a direct delivery sales order so that a purchase order is automatically created. What should you do after you enter the sales order and lines?

  • A. Set the ship complete toggle to On and confirm the order on the sales order header.
  • B. Select automatic and confirm the sales order on the line level setup tab in the reservation field.
  • C. Change the customer’s address to the vendor’s direct delivery address and confirm the sales order.
  • D. Select the direct delivery option under the sales order action pane and complete the form.

Answer: D

NEW QUESTION 14

A company uses the Dynamics 365 for Finance and Operations Warehouse management module. The company requires production waves to be processed in batch.
You need to configure wave processing.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.
MB-330 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/warehousing/tasks/configure-wa

NEW QUESTION 15

A company plans to use warehouse management and dock appointment scheduling in Dynamics 365 for Finance and Operations.
You need to configure the system.
Which configuration options should you use? To answer, drag the appropriate configuration options to the
correct requirements. Each configuration option may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
MB-330 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
MB-330 dumps exhibit

NEW QUESTION 16

A client wants to use Dynamics 365 for Finance and Operations to assist processing trade.
You need to ensure that intercompany sales order payments process correctly when intercompany payable journals are posted.
What should you do?

  • A. In the intercompany trade parameters for sales order policies, select Post journal automatically
  • B. In the intercompany trade parameters for purchase order policies, select Post invoice automatically
  • C. In the intercompany trade parameters for purchase order policies, select Post journal automatically
  • D. In the intercompany trade parameters for sales order policies, select Allow summary update of documents for original customer

Answer: A

NEW QUESTION 17
......

100% Valid and Newest Version MB-330 Questions & Answers shared by Downloadfreepdf.net, Get Full Dumps HERE: https://www.downloadfreepdf.net/MB-330-pdf-download.html (New 161 Q&As)