NS0-184 | A Review Of Precise NS0-184 Preparation Exams

NEW QUESTION 1
Click the Exhibit button.

You are preparing to replace a Cisco Nexus 92300YC switch. You have executed the cluster pingclusternode1commandandreceivedtheoutputasshownintheexhibit.
Which two checks indicate that the cluster is ready for the replacement to be performed? (Choose
two.)

• A. 2paths up, 0paths down(TCP check)
• B. 2paths up, 0 paths down(UDP check)
• C. largerthanPMTUcommunicationsucceedson4path(s)
• D. basicconnectivitysucceedson4path(s)

Answer: AD

NEW QUESTION 2
A storage administrator is trying to upgrade a pair of FAS2520s with internal SATA storage to a new 2-node FAS8300 cluster. The storage administrator wants to preserve the existing data.
In this scenario, which two capabilities are available to the storage administrator? (Choose two.)

• A. the ability to move the volumes from the old nodes to the new nodes
• B. the ability to pull out the tray of internal disks of the FAS2520s and reseat the tray in the internal storage of the FAS8300s
• C. the ability to create a 4-node MetroCluster across the four nodes
• D. the ability to convert the FAS2520s to disk shelves and attach them to the new nodes

Answer: CD

NEW QUESTION 3
You have a 2-node FAS8300 ONTAP 9.8 cluster that serves SMB shares. You are configuring interface
groups for higher performance and resiliency.
Which two NetApp best practices should you follow to satisfy these performance and resiliency
requirements? (Choose two.)

• A. Use ports from different NICs.
• B. Use ports from the same NICs.
• C. Use ports with different chipsets.
• D. Use ports with the same chipsets.

Answer: AD

Explanation:
Reference: https://www.netapp.com/media/19900-tr-4847.pdf (7)

NEW QUESTION 4
Click the Exhibit button.

A customer wants to replace their ONTAP cluster CN1610 switches with Cisco Nexus 3132Q-V
switches. They want to perform a non-disruptive upgrade.
Referring to the exhibit, which cable will be required to non-disruptively migrate to the new
switches?

• A. a 10GbE SFP+ to SFP+ cable
• B. a 100GbE QSFP28+ to 4x25GbE SFP28+ cable
• C. a 40GbE QSFP+ to QSFP+ cable
• D. a 40GbE QSFP+ to 4x10GbE SFP+ cable

Answer: B

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/upgrade/guide/b_Cisco_Nexus_9000_Series_NXOS_Software_Upgrade_and_Downgrade_Guide_Release_7x/b_Cisco_Nexus_9000_Series_NXOS_Software_Upgrade_and_Downgrade_Guide_Release_7x_chapter_010.html

NEW QUESTION 5
You are preparing to add a 2-node AFF A250 system to an existing 4-node AFF A800 cluster with Cisco
Nexus 3232C switches. The cluster switches are currently running the Cluster-HA RCF.
In this scenario, which two steps are required to install the AFF A250 system? (Choose two.)

• A. Load the Storage RCF.
• B. Cable the AFF A250 nodes to the next free ports on the switch.
• C. Cable the AFF A250 nodes to the breakout ports on the switch.
• D. Load the Cluster-HA-Breakout RCF.

Answer: CD

NEW QUESTION 6
Upon finishing the Installation of a new system for a customer, they request that you train them on how to administer the system. In this scenario, which two responses are appropriate? (Choose two.)

• A. Visit the NetApp MySupport Site and look for the Express Guides, they will guide you through the dailytasks and provide input and output examples.
• B. If you have a specific issue, you can visit the Knowledge Base Web site (https://kb.netapp,com).
• C. The answers to any of your questions can be found on the NetApp SmartSolve site(http://smartsolve.netapp.com).
• D. You should open a case with NetApp Support for all future questions with low priority and include thekeyword "Training" in the title.

Answer: AC

NEW QUESTION 7
You want to use the NetAppDocs tool to collect information on a newly configured ONTAP 9.8 cluster and to generate a Word document with the details of the cluster configuration.
Which two data sources would you use to collect the necessary data? (Choose two.)

• A. Active IQ Digital Advisor
• B. Active IQ Unified Manager
• C. ONTAP Cluster
• D. AutoSupport packages

Answer: BC

NEW QUESTION 8
Click the Exhibit button.

During an ONTAP cluster handover procedure, your customer asks how to identify and solve issues
that might occur on the newly deployed array.
Referring to the exhibit, which two widgets would the customer use to help with these issues?
(Choose two.)

• A. Guide Me
• B. Active IQ
• C. Contracts and Warranties
• D. ASE Corner

Answer: AC

NEW QUESTION 9
Click the Exhibit button.

You are attempting to add a new ONTAP 9.7 node to your ONTAP 9.8 NetApp cluster. After
attempting to add the node, it fails as shown in the exhibit.
What are two non disruptive ways to add the new node to your ONTAP cluster? (Choose two.)

• A. ReverttheclusterfromONTAP9.8toONTAP9.7.
• B. Re-initialize allthenodesintheONTAPclusterwithONTAP9.7.
• C. Upgrade the new node fromONTAP9.7toONTAP9.8.
• D. Add the node using the-allow-mixed-version-parameter.

Answer: CD

Explanation:
Reference: https://docs.netapp.com/us-en/ontap/pdfs/sidebar/Upgrade_ONTAP.pdf

NEW QUESTION 10
You want to add an AFF A400HA pair to an existing cluster. In this scenario,which LIF type is required?

• A. cluster-mgmt
• B. intercluster
• C. data
• D. node-mgmt

Answer: B

Explanation:
Reference: https://docs.netapp.com/us-en/ontapmetrocluster/pdfs/sidebar/Add_a_new_controller_module_to_each_cluster.pdf

NEW QUESTION 11
After moving a new AFF A400 cluster into production, the administrator notices error events in ONTAP
System Manager regarding SAS HA issues.
In this scenario, which NetApp tool would have identified these errors after the installation process?

• A. Cloud Manager
• B. ONTAP System Manager
• C. Active IQ Config Advisor
• D. Active IQ Unified Manager

Answer: B

NEW QUESTION 12
You have a new 2-node FAS8700 ONTAP 9.8 cluster. One of the nodes has 24x16 TB NL-SAS disks
assigned and available for a new aggregate. You created the aggregate with one RAID group and two spare disks.
In this scenario, how many data drives are in the aggregate?

• A. 20
• B. 18
• C. 17
• D. 19

Answer: A

NEW QUESTION 13
YouareinstallinganAFFA700systemwithtwodisk shelves usingADPv2.Aftersettingupthecluster, you
realize that one drive shelf was powered off and that the drives have not been assigned to any of the
nodes.
In this scenario, which two resources will help you find a solution? (Choose two.)

• A. Active IQ Config Advisor
• B. NetApp Documentation Center
• C. NetApp Knowledge Base
• D. Active IQ Digital Advisor

Answer: AC

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-systems/fas9000/install-detailedguide.html#option-1-cable-the-controllers-to-ds212c-or-ds224c-drive-shelves

NEW QUESTION 14
Which two statements are true about the LIFs that are used for a cluster peer relationship? (Choose two.)

• A. The MTU size must be set to 9000 bytes on all the LIFs used for the cluster peering.
• B. The LIFs must use the default intercluster service policy.
• C. The LIFs must be in dedicated broadcast domains an IPspaces.
• D. At least one LIF per node is required on each cluster.

Answer: BC

NEW QUESTION 15
You are preparing for the installation of a new AFF A400 system with NS224 NS224 storage shelves. You want to gather information on the connectivity options for the external shelves. In this scenario, which NetApp tool would you use for this task?

• A. Hardware Universe.
• B. Active IQ Config Advisor
• C. Active IQ Unified Manager
• D. Interoperability Matrix Tool

Answer: A

NEW QUESTION 16
You are deploying a new AFF All SAN Array A250 into a customer’s existing data fabric.
In this scenario, which two tools would give insight into their existing Cisco MDS fabric configuration?
(Choose two.)

• A. Brocade SAN Health
• B. Cisco Data Center Network Manager (DCNM)
• C. Active IQ
• D. Active IQ Config Advisor

Answer: BC

Explanation:
Explanation\:
Reference: https://www.cisco.com/c/en/us/products/collateral/storage-networking/mds-9700-seriesmultilayerdirectors/
cisco-ucs-mds.html
https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-x-series-modularsystem/
flexpod-datacenter-ucs-intersight.html

NEW QUESTION 17
You have completed a base installation and system registration of an AFF A250 system, but you notice that you have one failed drive. Neither ''un-failing'' nor reseating the drive helped to repair it. You must ensure proper replacement of the failed drive.
In this scenario, which two actions should you take? (Choose two.)

• A. Ask the customer to open a technical case with NetApp Support.
• B. Ask the customer for a drive with the same capacity and replace it.
• C. Run Active IQ Config Advisor to collect all the logs on the system.
• D. Power off the system until the drive has been replaced.

Answer: BC

NEW QUESTION 18
When creating a new 3.8 TB SSD-based aggregate, what is the default RAID type used with ONTAP 9.8?

• A. RAID 4
• B. RAID-TEC
• C. RAID 0
• D. RAID DP

Answer: D

NEW QUESTION 19
......