Proper study guides for Down to date Microsoft Installing and Configuring Windows Server 2012 certified begins with Microsoft mcp 70 410 preparation products which designed to deliver the High value 70 410 pdf questions by making you pass the vce 70 410 test at your first time. Try the free 70 410 vce demo right now.
2017 NEW RECOMMEND
Free VCE & PDF File for Microsoft 70-410 Real Exam
Pass on Your First TRY 100% Money Back Guarantee Realistic Practice Exam Questions
Q141. – (Topic 3)
Your network contains an Active Directory domain named adatum.com. The domain contains the servers shown in the following table.
You need to ensure that you can use Server Manager on DC1 to manage DC2.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Install Microsoft .NET Framework 4 on DC2.
B. Install Remote Server Administration Tools on DC1.
C. Install Remote Server Administration Tools on DC2.
D. Install Windows Management Framework 3.0 on DC2.
Windows Management Framework 3.0. To use this release of Server Manager to access and manage remote servers that are running Windows Server 2008 or Windows Server 2008 R2, you must first install .NET Framework 4.0, and then install Windows Management Framework 3.0 on those servers. Note: In Windows Server 2012 R2, you can use Server Manager to perform management tasks on remote servers. Remote management is enabled by default on servers that are running Windows Server 2012 R2. To manage a server remotely by using Server Manager, you add the server to the Server Manager server pool. You can use Server Manager to manage remote servers that are running Windows Server 2008 and Windows Server 2008 R2, but the following updates are required to fully manage these older operating systems (see above).
Reference: Configure Remote Management in Server Manager.
Q142. – (Topic 2)
You have a server named Server1 that runs Windows Server 2012 R2.
You connect three new hard disks to Server1.
You need to create a storage space that contains the three disks.
The solution must meet the following requirements:
. Provide fault tolerance if a single disk fails.
. Maximize the amount of files that can be stored in the storage space.
What should you create?
A. A simple space
B. A spanned volume
C. A mirrored space
D. A parity space
A. Stripes data across a set of pool disks, and is not resilient to any disk failures.
B. A spanned volume is a dynamic volume consisting of disk space on more than one physical disk and not fault tolerant
C. Fault tolerant but Not max space
D. Fault tolerant and better space ratio Parity spaces are designed for capacity efficiency and increased resiliency. Parity spaces are best suited for archival data and streaming media, such as music and videos.
Q143. – (Topic 3)
You have a file server named Server1 that runs Windows Server 2012 R2.
You need to ensure that a user named User1 can use Windows Server Backup to create a complete backup of Server1.
What should you configure?
A. The local groups by using Computer Management
B. The Role Assignment by using Authorization Manager
C. A task by using Authorization Manager
D. The User Rights Assignment by using the Local Group Policy Editor
Q144. – (Topic 1)
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.Server1 has the virtual switches listed in the following table.
You create a virtual machine named VM1.VM1 has two network adapters. One network adapter connects to vSwitch1. The other network adapter connects to vSwitch2.You configure NIC teaming on VM1.
You need to ensure that if a physical NIC fails on Server1, VM1 remains connected to the network.
What should you do on Server1?
A. Run the Set-VmNetworkAdaptercmdlet.
B. Add a new network adapter to VM1.
C. Create a new virtual switch on Server 1.
D. Modify the properties of vSwitch1 and vSwitch2.
Q145. – (Topic 2)
Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.Server1 is configured as shown in the following table.
VM3 is used to test applications.
You need to prevent VM3 from synchronizing its clock to Server1.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O visualization
Integration Services settings on virtual machines includes services such as operating system shutdown, time synchronization, data exchange, Heart beat, and Backup (volume snapshot services. Thus you should disable the time synchronization using Integration Services.
References: http://blogs.technet.com/b/virtualization/archive/2008/08/29/backing-up-hyper-v-virtual-machines.aspx Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p. 144
Q146. – (Topic 3)
You work as a senior administrator at Lead2pass.com. The Lead2pass.com network consists of a single domain named Lead2pass.com. All servers on the Lead2pass.com network have Windows Server 2012 R2 installed.
You are running a training exercise for junior administrators. You are currently discussing storage pools.
Which of the following are TRUE with regards to storage pools?
A. It allows you to group physical disks into one or more containers.
B. It prevents you from grouping physical disks into one or more containers.
C. It allows you to easily add storage with minor impact on users.
D. It allows you to easily add storage without impacting users.
Q147. – (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed.
Contoso.com has a server, named ENSUREPASS-SR07, which has the AD DS, DHCP, and DNS server roles installed. Contoso.com also has a server, named ENSUREPASS-SR08, which has the DHCP, and Remote Access server roles installed. You have configured a server, which has the File and Storage Services server role installed, to automatically acquire an IP address.
The server is named ENSUREPASS-SR09. You then create a filter on ENSUREPASS-SR07.
Which of the following is a reason for this configuration?
A. To make sure that ENSUREPASS-SR07 issues ENSUREPASS-SR09 an IP address.
B. To make sure that ENSUREPASS-SR07 does not issue ENSUREPASS-SR09 an IP address.
C. To make sure that ENSUREPASS-SR09 acquires a constant IP address from ENSUREPASS-SR08 only.
D. To make sure that ENSUREPASS-SR09 is configured with a static IP address.
Q148. – (Topic 3)
You have a server that runs Windows Server 2012 R2. The server contains the disks configured as shown in the following table.
You need to create a volume that can store up to 3 TB of user files. The solution must ensure that the user files are available if one of the disks in the volume fails. What should you create?
A. A mirrored volume on Disk 1 and Disk 4
B. A storage pool on Disk 2 and Disk 3
C. A storage pool on Disk 1 and Disk 3
D. A mirrored volume on Disk 2 and Disk 3
Q149. – (Topic 3)
Your companyâs security policy states that all of the servers deployed to a branch office must not have the graphical user interface (GUI) installed. In a branch office, a support technician installs a server with a GUI installation of Windows Server 2012 on a new server, and then configures the server as a DHCP server.
You need to ensure that the new server meets the security policy. You want to achieve this goal by using the minimum amount of Administrative effort.
What should you do?
A. Reinstall Windows Server 2012 on the server.
B. From Windows PowerShell, run Uninstall-WindowsFeature Desktop-Experience.
C. From Windows PowerShell, run Uninstall-WindowsFeature PowerShell-ISE.
D. From Server Manager, uninstall the User Interfaces and Infrastructure feature.
Q150. – (Topic 2)
Your network contains an Active Directory domain named contoso.com.
The password policy for the domain is set to require a minimum password length of 10 characters.
A user named User1 and a user named User2 work for the sales department.
User1 is forced to create a domain password that has a minimum of 12 characters. User2 is forced to create a domain password that has a minimum of eight characters.
You need to identify what forces the two users to have different password lengths.
Which tool should you use?
A. Credential Manager
B. Security Configuration Wizard (SCW)
C. Group Policy Management
D. Active Directory Administrative Center
In Windows Server 2008, you can use fine-grained password policies to specify multiple password policies and apply different password restrictions and account lockout policies to different sets of users within a single domain. For example, to increase the security of privileged accounts, you can apply stricter settings to the privileged accounts and then apply less strict settings to the accounts of other users. Or in some cases, you may want to apply a special password policy for accounts whose passwords are synchronized with other data sources.
This is found in the Active Directory Administrative Center. You can use Active Directory Administrative Center to perform the following Active Directory administrative tasks: Create new user accounts or manage existing user accounts Create new groups or manage existing groups Create new computer accounts or manage existing computer accounts Create new organizational units (OUs) and containers or manage existing OUs Connect to one or several domains or domain controllers in the same instance of Active Directory Administrative Center, and view or manage the directory information for those domains or domain controllers Filter Active Directory data by using query-building search