Skip to content

What Pinpoint 300-208 practice test Is?

Act now and download your Cisco 300 208 sisas test today! Do not waste time for the worthless Cisco ccnp security sisas 300 208 official cert guide tutorials. Download Leading Cisco SISAS Implementing Cisco Secure Access Solutions (SISAS) exam with real questions and answers and begin to learn Cisco cisco 300 208 with a classic professional.

2018 NEW RECOMMEND

Free VCE & PDF File for Cisco 300-208 Real Exam
(Full Version!)

Pass on Your First TRY 100% Money Back Guarantee Realistic Practice Exam Questions

Free Instant Download NEW 300-208 Exam Dumps (PDF & VCE):
Available on:
https://www.certleader.com/300-208-dumps.html

P.S. Breathing 300-208 practice exam are available on Google Drive, GET MORE: https://drive.google.com/open?id=1JgMMGZemfjZpkIcsxrJP-8UJhYUjHYco

New Cisco 300-208 Exam Dumps Collection (Question 10 – Question 19)

Question No: 10

Which three network access devices allow for static security group tag assignment? (Choose three.)

A. intrusion prevention system

B. access layer switch

C. data center access switch

D. load balancer

E. VPN concentrator

F. wireless LAN controller

Answer: B,C,E

Question No: 11

Which feature enables the Cisco ISE DHCP profiling capabilities to determine and enforce authorization policies on mobile devices?

A. disabling the DHCP proxy option

B. DHCP option 42

C. DHCP snooping

D. DHCP spoofing

Answer: A

Question No: 12

In the command 'aaa authentication default group tacacs local', how is the word 'default' defined?

A. Command set

B. Group name

C. Method list

D. Login type

Answer: C

Question No: 13

Which effect does the ip http secure-server command have on a Cisco ISE?

A. It enables the HTTP server for users to connect on the command line.

B. It enables the HTTP server for users to connect by using web-based authentication.

C. It enables the HTTPS server for users to connect by using web-based authentication.

D. It enables the HTTPS server for users to connect on the command line.

Answer: C

Question No: 14

Which description of the use of low-impact mode in a Cisco ISE deployment is correct?

A. It continues to use the authentication open capabilities of the switch port, which allows traffic to enter the switch before an authentication result.

B. Low-impact mode must be the final phase in deploying Cisco ISE into a network environment using the

phased approach.

C. The port does not allow any traffic before the authentication (except for EAP, Cisco Discovery Protocol, and LLDP), and then the port is assigned to specific authorization results after the authentication.

D. It enables authentication (with authentication open), sees exactly which devices fail and which succeed, and corrects the failed authentications before they cause any problems.

Answer: A

Question No: 15

CORRECT TEXT

The Secure-X company has recently successfully tested the 802.1X authentication deployment using the Cisco Catalyst switch and the Cisco ISEv1.2 appliance. Currently, each employee desktop is connected to an 802.1X enabled switch port and is able to use the Cisco AnyConnect NAM 802.1Xsupplicantto log in and connect to the network.

Currently, a new testing requirement is to add a network printer to the Fa0/19 switch port and have it connect to the network. The network printer does not support 802.1X supplicant. The Fa0/19 switch port is now configured to use 802.1X authentication only.

To support this network printer, the Fa0/19 switch port configuration needs to be edited to enable the network printer to authenticate using its MAC address. The network printer should also be on VLAN 9.

Another network security engineer responsible for managing the Cisco ISE has already per-configured all the requirements on the Cisco ISE, including adding the network printer MAC address to the Cisco ISE endpoint database and etc…

Your task in the simulation is to access the Cisco Catalyst Switch console then use the CLI to:

u2022 Enable only the Cisco Catalyst Switch Fa0/19 switch port to authenticate the network printer using its MAC address and:

u2022 Ensure that MAC address authentication processing is not delayed until 802.1Xfails

u2022 Ensure that even if MAC address authentication passes, the switch will still perform 802.1X authentication if requested by a 802.1X supplicant

u2022 Use the required show command to verify the MAC address authentication on the Fa0/19 is successful

The switch enable password is Cisco

For the purpose of the simulation, to test the network printer, assume the network printer will be unplugged then plugged back into the Fa0/19 switch port after you have finished the required configurations on the Fa0/19 switch port.

Note: For this simulation, you will not need and do not have access to the ISE GUI To access the switch CLI, click the Switch icon in the topology diagram

Answer:

Review the explanation for full configuration and solution.

Explanation:

Initial configuration for fa 0/19 that is already done:

AAA configuration has already been done for us. We need to configure mac address bypass on this port to achieve the goal stated in the question. To do this we simply need to add this command under the interface:

mab

Then do a shut/no shut on the interface. Verification:

Question No: 16

Refer to the exhibit.

Which ISE flow mode does this diagram represent?

A. Closed mode

B. Monitor mode

C. Application mode

D. Low-impact mode

Answer: B

Question No: 17

What is a feature of Cisco WLC and IPS synchronization?

A. Cisco WLC populates the ACLs to prevent repeat intruder attacks.

B. The IPS automatically send shuns to Cisco WLC for an active host block.

C. Cisco WLC and IPS synchronization enables faster wireless access.

D. IPS synchronization uses network access points to provide reliable monitoring.

Answer: B

Question No: 18

What are three portals provided by PSN? (Choose three.)

A. Monitoring

B. Troubleshooting

C. Sponsor

D. Guest

E. My devices

F. Admin

Answer: C,D,E

Question No: 19

Which statement about the CAK is true?

A. It is the master key that generates the other keys that MACsec requires.

B. Failed MACsec connections fall back to MAB by default.

C. It is the key that is used to discover MACsec peers and perform key negotiation between the peers.

D. It is the secret key that encrypts traffic during the connection.

E. It is the key that is used to negotiate session encryption keys.

Answer: A

P.S. Easily pass 300-208 Exam with Surepassexam Breathing Dumps & pdf vce, Try Free: https://www.surepassexam.com/300-208-exam-dumps.html (310 New Questions)